Product Details | RELAY-SWITCH

5999-00-592-7561 An item having the dual function of a RELAY (as modified) and a SWITCH (as modified) assembled together on a common mounting or in a single inclosure. Contacts may be common to both relay and switch. For relay operated switches, see RELAY (as modified). Excludes CIRCUIT BREAKER and relays with protruding shafts.

Part Alternates: 7012SD, 5999-00-592-7561, 00-592-7561, 5999005927561, 005927561

Electrical and Electronic Equipment Components | Miscellaneous Electrical and Electronic Components

Supply Group (FSG) NSN Assign. NIIN
59 03 JAN 1975 00-592-7561

Cross Reference | NSN 5999-00-592-7561

Part Number Cage Code Manufacturer
7012SD 89020 TYCO ELECTRONICS/AGASTAT RELAYS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5999-00-592-7561

Technical Data | NSN 5999-00-592-7561

Characteristic Specifications
RELAY TYPE TIME DELAY
SWITCH TYPE PRESSURE
CONTACT ARRANGEMENT 1DPDT
CONTACT CURRENT TYPE AC AND DC
MAXIMUM VOLTAGE RATING IN VOLTS 480.0
CURRENT RATING AT MAXIMUM RATED VOLTAGE 10.0 AMPERES RESISTIVE
MAXIMUM CURRENT RATING IN AMPS 20.0 RESISTIVE
VOLTAGE RATING AT MAXIMUM RATED CURRENT 240.0 VOLTS
COIL CURRENT TYPE DC
OPERATING VOLTAGE IN VOLTS 200.0 MINIMUM AND 300.0 MAXIMUM
OPERATING CURRENT IN AMPS ANY ACCEPTABLE
MAXIMUM DC RESISTANCE IN OHMS ANY ACCEPTABLE
ACTION TYPE TIME DELAY
TRIPPING TIME IN SECONDS 50.0
CONTINUOUS LOAD PERCENTAGE PER SPECIFIED TRIPPING ACTION TIME ANY ACCEPTABLE
OVERALL LENGTH 3.250 INCHES NOMINAL
OVERALL WIDTH 3.090 INCHES NOMINAL
OVERALL HEIGHT 5.760 INCHES NOMINAL
MOUNTING CONFIGURATION VERTICAL MOUNTING,FRONT OR BACK,OR HORIZONTAL MOUNTING,4 TAPPED HOLES ON BACK PLATE
SPECIAL FEATURES CALIBRATED TIMING DIAL FRONT SCREW TERMINALS 8-32 TRUSS HEAD SCREWS,POTTED COIL,AMBIENT TEMP RANGE OF M67 DEG F TO P165 DEG F.

Restrictions/Controls & Freight Information | NSN 5999-00-592-7561

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
No Freight Information