Product Details | MOTOR-TACHOMETER GENERATOR

6105-00-821-5776 An item which is an electrical rotating machine combining both control motor and tachometer generator action. The control motor and tachometer generator may be contained in the same or separate housings. It is designed for servo application where instant response to input signal is essential. It is generally used in circuits where the output potential from the tachometer generator is fed back to prevent excessive oscillation and for assuring high stability in a servo loop. Excludes DYNAMOTOR; and MOTOR-GENERATOR.

Part Alternates: CR40809049, SJ11F32, ST11051, IGB001, IGB-001, 11MG-503-C/100-N-14A, 11MG503C100N14A, 12971, 1297-1, 5110971, 511097-1, 6105-00-821-5776, 00-821-5776, 6105008215776, 008215776

Electric Wire, and Power and Distribution Equipment | Motors, Electrical

Supply Group (FSG) NSN Assign. NIIN
61 01 JAN 1962 00-821-5776

Cross Reference | NSN 6105-00-821-5776

Part Number Cage Code Manufacturer
11MG-503-C/100-N-14A 06989 API HAROWE INC DBA API MOTION DIV API
1297-1 19710 MPC PRODUCTS CORPORATION DBA WOODWARD MPC
511097-1 64547 HONEYWELL INTERNATIONAL INC DBA HONEYWELL
CR40809049 05088 KEARFOTT CORPORATION DIV A SUBSIDIARY OF ASTRONAUTICS
IGB-001 40968 ISLAND COMPONENTS GROUP, INC.
SJ11F32 19070 EASTERN AIR DEVICES INC DBA EAD MOTORS
ST11051 19333 MAGNETIC PERIPHERALS INC NORMANDALE OPNS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 6105-00-821-5776

Technical Data | NSN 6105-00-821-5776

Characteristic Specifications
OVERALL LENGTH 2.263 INCHES
OVERALL WIDTH 1.065 INCHES
LENGTH OF SHAFT FROM HOUSING 0.358 INCHES SINGLE END
MOUNTING METHOD CLAMP RING
MOUNTING FACILITY TYPE AND QUANTITY 1 CLAMP COLLAR
CURRENT TYPE AC INPUT
FREQUENCY IN HERTZ 400.0 OUTPUT
PHASE SINGLE INPUT
CONNECTION TYPE AND VOLTAGE RATING IN VOLTS 115.0 LINE TO NEUTRAL SINGLE INPUT
TORQUE RATING AND TYPE 0.6 INCH-OUNCES STALLED
EXCITOR TYPE SEPARATELY EXCITED
TEMP RATING -55.0 OPERATING DEG CELSIUS AND 125.0 OPERATING DEG CELSIUS
TERMINAL TYPE AND QUANTITY 10 WIRE LEAD
CALIBRATION VOLTAGE OUTPUT TYPE IN VOLTS 0.5 AC
CALIBRATION SPEED IN RPM 1000.0
CONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS 67.5 AC
ROTOR SPEED RATING IN RPM 6000.0 SINGLE NO LOAD
SHAFT END CHARACTERISTIC A14 SINGLE STYLE SINGLE END
SHAFT DIAMETER 0.1250 INCHES NOMINAL SINGLE END
SPLINE LENGTH 0.3580 INCHES NOMINAL SINGLE END

Restrictions/Controls & Freight Information | NSN 6105-00-821-5776

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 062120 GENERATORS/MOTORS/PARTS NOI
Less than car load rating Q 70
Less than truck load rating W Rating Variable
Water commodity Code 593 unknown
Originating Activity Code XX
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 6105-00-821-5776

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Materiel Management Aggregation CodeSXSX:AF SICA RESIDUAL MMAC-OC-ALC
Price ValidationV The current standard price has been validated.
  • The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
  • The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
  • ZOP or Standard price challenges are permissible but must be supported by adequate justification.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each