Product Details | DRIFT METER

6605-00-194-2587 An item which measures the angle between the longitudinal axis of an aircraft and its actual path over the earth's surface. It may or may not be designed for obtaining the azimuth bearing and/or computing the ground speed of an aircraft.

Part Alternates: 29492EA51, 2949-2EA51, 6605-00-194-2587, 00-194-2587, 6605001942587, 001942587

Instruments and Laboratory Equipment | Navigational Instruments

Supply Group (FSG) NSN Assign. NIIN
66 01 JAN 1963 00-194-2587

Cross Reference | NSN 6605-00-194-2587

Part Number Cage Code Manufacturer
2949-2EA51 07213 HONEYWELL AEROSPATIALE INC

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 6605-00-194-2587

Technical Data | NSN 6605-00-194-2587

Characteristic Specifications
SCALE QUANTITY 1 AND 1 AND 1
SCALE NAME LINE AND AZIMUTH ANGLE AND DRIFT ANGLE
SCALE RANGE 0 TO 16 DEG FORWARD AND 0 TO 87 DEG REARWARD OF VERTICAL; 0 TO 360 DEG; 0 TO 20 DEG RIGHT AND 0 TO 20 DEG LEFT
SCALE SMALLEST INCREMENT GRADUATION 1 DEG; 1 DEG; 1 DEG
DIAL SCALE MARKING COLOR WHITE AND WHITE AND WHITE
SCALE BACKGROUND COLOR BLACK AND BLACK AND BLACK
KNOB QUANTITY 1 AND 1 AND 1
KNOB NAME RETICLE LIGHT RHEOSTAT CONTROL AND GYRO CAGING AND AZIMUTH DRIVE
KNOB LOCATION UPPER GYRO HOUSING TOP AND LOWER GYRO HOUSING SIDE AND UPPER STATIONARY TUBE HOUSING SIDE
OVERALL WIDTH 11.094 INCHES NOMINAL
OVERALL HEIGHT 18.000 INCHES NOMINAL
OVERALL THICKNESS 7.000 INCHES NOMINAL
MOUNTING METHOD FIXED FLANGE
ELECTRICAL CONNECTION QUANTITY 1
CONTACT QUANTITY 2
CONTACT TYPE PIN
ELECTRICAL CONNECTION CONTROLLING AGENCY ANA
ELECTRICAL CONNECTION IDENTIFYING NUMBER TYPE NO. AN3102-12S3P
CURRENT TYPE AC
VOLTAGE IN VOLTS 110.0
FREQUENCY IN HERTZ 400.0
PHASE SINGLE
RETICLE STABILIZATION CHARACTERISTIC GYRO STABILIZED
RETICLE ILLUMINATION PROVIDED
HANDLE QUANTITY 1 AND 1
HANDLE NAME SIGHT CONTROL LINE AND FILTER
HANDLE LOCATION FILTER HOUSING SIDE AND FILTER HOUSING SIDE
TUBE LENGTH 64.010 INCHES MINIMUM AND 64.040 INCHES MAXIMUM
ENVIRONMENTAL PROTECTION WINTERIZED
MANUFACTURERS CODE 07213
DESIGN CONTROL REFERENCE 2949-2EA51

Restrictions/Controls & Freight Information | NSN 6605-00-194-2587

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:BMunitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.)
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061700 ELEC APPLIANCES/INSTRUMENTS NOI
Less than car load rating W Rating Variable
Less than truck load rating W Rating Variable
Water commodity Code 658 unknown
Originating Activity Code XX
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 6605-00-194-2587

Category Code Description
Budget CodeC 1857X3010:Procurement Other than Air Force
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeVUVendor to user-of-supply concept.
Materiel Management Aggregation CodeXVSX:FMS UNIQUE/OC-ALC
Source of SupplyF8UOklahoma City Air Logistics Center
Tinker AFB, OK 73145-5989
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityTAF Recoverable Assembly Management System (AFRAMS)
Acquisition Advice CodesPRESTRICTED REQUISITION - SECURITY ASSISTANCE PROGRAM (SAP) 1. Indicates item is stocked or acquired only for SAP (replaces Military Assistance Program (MAP)) requirements, or 2. Indicates item is nonstocked and materiel is ordered from the contractor for shipment directly to the foreign government. 3. Base, post, camp, or station will not requisition.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes7RAeronautical Depot Level Repairable Spares
Naval Inventory Control Point, Philadelphia
Special Material IDFCCARGO/TRANSPORTAIRCRAFT(C118)
Issue Repair, or RequisitionARRepairable item subject to centrally managed rework program at designated sites. Mandatory turn-in of item required except when initial issue or replacement of surveyed item is involved.
Source of SupplyN32Naval Inventory Control Point
Philadelphia, PA 19111-5098
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
ReparabilityHDepot Level Reparable
Acquisition Advice CodesVTERMINAL ITEM # Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each