Product Details | SIGNAL GENERATOR

6625-00-518-4662 An instrument which produces a continuous audio and/or radio frequency voltage, and which is designed for test purposes only. It may provide an output at one or more fixed frequencies or be continuously variable over one or more bands. The fixed frequency type is distinguished from CALIBRATOR, FREQUENCY in that it is a voltage source and is not primarily intended for checking frequencies from other sources. Excludes GENERATOR, INTERFERENCE.

Part Alternates: 200C, 6625-00-518-4662, 00-518-4662, 6625005184662, 005184662

Instruments and Laboratory Equipment | Electrical and Electronic Properties Measuring and Testing Instruments

Supply Group (FSG) NSN Assign. NIIN
66 01 JAN 1963 00-518-4662

Cross Reference | NSN 6625-00-518-4662

Part Number Cage Code Manufacturer
200C 1LQK8 KEYSIGHT TECHNOLOGIES, INC.
200C 28480 HEWLETT-PACKARD COMPANY DBA HEWLETT-PACKARD CO. OR HP

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 6625-00-518-4662

Technical Data | NSN 6625-00-518-4662

Characteristic Specifications
FREQUENCY RANGE RATING 0.020 TO 200.000 KILOHERTZ
FREQUENCY BAND QUANTITY 4
CALIBRATION ACCURACY RATING LESS THAN PORM 1 PERCENT
MAXIMUM SIGNAL OUTPUT 100 MW
SIGNAL OUTPUT CONSTANCY PORM 1 DB MAX VARIATION FROM 20 CYCLES TO 150 KC
OUTPUT IMPEDANCE RATING 1000.0 OHMS NOMINAL
CURRENT TYPE AC
VOLTAGE RATING 115.0 VOLTS NOMINAL
FREQUENCY RATING 60.0 HERTZ NOMINAL
PHASE SINGLE
INTERNAL BATTERY ACCOMMODATION NOT INCLUDED
CASE MATERIAL STEEL
CASE SURFACE TREATMENT FINISH, WRINKLE
OVERALL LENGTH 16.000 INCHES NOMINAL
OVERALL WIDTH 9.000 INCHES NOMINAL
OVERALL HEIGHT 8.000 INCHES NOMINAL
MOUNTING TYPE RACK
III PRECIOUS MATERIAL SILVER
III FUNCTIONAL CLASSIFICATION BB-1.1
III ENTRY DATE 91-01-09
MANUFACTURERS CODE 1LQK8
DESIGN CONTROL REFERENCE 200C

Restrictions/Controls & Freight Information | NSN 6625-00-518-4662

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:QStrategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.”
Precious Metals Indicator Code:SItem contains silver
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061700 ELEC APPLIANCES/INSTRUMENTS NOI
Less than car load rating P 77.5
Less than truck load rating W Rating Variable
Water commodity Code 653 unknown
Originating Activity Code XX
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity
Air Special Handling Q Extremely fragile items including delicate instruments.
Special Handling Code Q unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable