Product Details | COUPLER CONTROL TEST SET

6625-00-647-4111

Part Alternates: TS-1064/ARC-58, TS1064ARC58, 5221614004, 522-1614-004, 6625-00-647-4111, 00-647-4111, 6625006474111, 006474111

Instruments and Laboratory Equipment | Electrical and Electronic Properties Measuring and Testing Instruments

Supply Group (FSG) NSN Assign. NIIN
66 01 JAN 1963 00-647-4111

Cross Reference | NSN 6625-00-647-4111

Part Number Cage Code Manufacturer
522-1614-004 13499 ROCKWELL COLLINS, INC. DBA GOVERNMENT SYSTEMS
TS-1064/ARC-58 80058 JOINT ELECTRONICS TYPE DESIGNATION SYSTEM

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 6625-00-647-4111

Technical Data | NSN 6625-00-647-4111

Characteristic Specifications
GENERAL CHARACTERISTICS ITEM DESCRIPTION TYPE OF TEST FOR WHICH INTENDED,CONTROL CIRCUIT TESTS,SERVO AMPLIFIERTESTS,RELAY VOLTAGE CHECK,MEASURE- MENT OF VOLTAGES,ALSO PROVIDES FOLLOWING AUXILIARY TEST,REFLECTED POWER TEST,DC VOLTMETER TEST,OPERATING DATA,OUTPUT,CALIBRATED AC,4 WATTS TOTAL AT 74,65,59,OR 14 VOLTS PORM 2 VOLTS,400 CYCLES,VOLTMETER,RANGE 0 TO 4,0 TO 10,0 TO 40,0 TO 100,AND 0 TO 400V DC,SENSITIVITY 10,000 OHMS PER V,METER IS PROVIDED TO INDI CATE NON-OPERATIONAL POINTS WHERE TRO-UBLE EXISTS,7 PANEL INDICATOR LAMPS PROVIDED,CONTAINS 8 POSITION FUNCTIONSELECTOR,CONTAINS ONE SELECTION PUSH-BUTTON SERVO TEST SWITCH,CONTAINS ONELINE ADJUST VARIAC,OPERATION POWER REQUIREMENTS,115V,400 CYCLES,SINGLEPHASE,28V DC,MULTIPLE ITEMS IN SELF-CONTAINED CARRYING CASE,ALUMINUM MATERIAL,GRAY FINISH,7-3/4 IN. D X 14 IN. W X 12-7/8 IN. H
SPECIAL FEATURES SEVERAL DC METER VOLTAGE RANGES ARE PROVIDED TO CHECK TEST POINTS,IF LEFT ON THE ON POSITION WHILE ON ANY TEST POINT FOR EXTENDED LENGTHS OF TIME,THE COUPLER CONTROL WILL NOT BE ADVERSELY AFFECTED

Restrictions/Controls & Freight Information | NSN 6625-00-647-4111

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:CMunitions List Item or Commerce Control List Item. Demilitarization required. Remove and/or demilitarize installed key point(s) as prescribed in the Defense Demilitarization Manual, or lethal parts, components and accessories.
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061700 ELEC APPLIANCES/INSTRUMENTS NOI
Less than car load rating P 77.5
Less than truck load rating W Rating Variable
Water commodity Code 72D unknown
Originating Activity Code XX
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code Z unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable