Product Details | OSCILLOSCOPE

6625-00-668-9461 A test instrument which is designed to give visual indications on an LCD display or a cathode ray tube of instantaneous values and variations in electrical voltage. It can also be used to indicate any quantity which can be converted into terms of electrical potential. It may include an integral pulse generator, the output of which can be used to trigger an external component; be triggered by pulses from an external source, or it may utilize an LCD display or a special type of multigun cathode ray tube and circuitry which permits a trace(s) to be sustained and displayed indefinitely, and the trace(s) may be erased when desired. For items which are not separable and operable when detached from equipment of which they are a part (built into operational equipment), see INDICATOR (2) (as modified); MONITOR (as modified); and RECORDER (as modified). See also OSCILLOGRAPH.

Part Alternates: F16Q124050100, F16Q124050-100, MIL015458A, MIL0-15458A, 0S51USM24C, DFS0, 6625-00-668-9461, 00-668-9461, 6625006689461, 006689461

Instruments and Laboratory Equipment | Electrical and Electronic Properties Measuring and Testing Instruments

Supply Group (FSG) NSN Assign. NIIN
66 01 JAN 1963 00-668-9461

Cross Reference | NSN 6625-00-668-9461

Part Number Cage Code Manufacturer
0S51USM24C 80058 JOINT ELECTRONICS TYPE DESIGNATION SYSTEM
DFS0 0ZW31 MEASUREMENT SPECIALTIES, INC. DBA IC SENSORS DIVISION
F16Q124050-100 99993 DEPARTMENT OF THE NAVY
MIL0-15458A 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 6625-00-668-9461

Technical Data | NSN 6625-00-668-9461

Characteristic Specifications
SCREEN SIZE 3 IN.
BEAM QUANTITY 1
SWEEP CIRCUITS INCLUDED
GENERATOR DRIVEN FEATURE NOT INCLUDED
SWEEP CIRCUIT TYPE HORIZONTAL AND VERTICAL
SWEEP FREQUENCY RANGE 8.0 TO 800000.0 HERTZ
SINGLE TRIGGER SWEEP DURATION 3.0 MICROSECONDS NOMINAL
TRIGGER SWEEP VOLTAGE AMPLITUDE RATING 50.0 VOLTS NOMINAL
TRIGGER SWEEP POLARITY SWITCH INCLUDED
TRIGGER SWEEP MARKER INTERVALS 0.2 USEC;1 USEC;10 USEC;100 USEC;500 USEC
EXPANDED SWEEP NOT PROVIDED
AMPLIFIER DEFLECTION SENSITIVITY PROVISION PROVIDED
VERTICAL DEFLECTION SENSITIVITY VOLTAGE RATING 50.0 MILLIVOLTS NOMINAL RMS PER INCH
HORIZONTAL DEFLECTION SENSITIVITY VOLTAGE RATING 3.5 VOLTS NOMINAL RMS PER INCH
INPUT INTENSITY MODULATION FEATURE NOT PROVIDED
PLATE DIRECT CONNECTION DEFLECTION SENSITIVITY PROVISION PROVIDED
DIRECT CONNECTION VERTICAL DEFLECTION SENSITIVITY VOLTAGE RATING 110.0 VOLTS NOMINAL RMS PER INCH
DIRECT CONNECTION HORIZONTAL DEFLECTION SENSITIVITY VOLTAGE RATING 150.0 VOLTS NOMINAL RMS PER INCH
FREQUENCY RESPONSE RATING PROVIDED
X-AXIS FREQUENCY RESPONSE RATING 8.0 HERTZ MINIMUM AND 800000.0 HERTZ MAXIMUM
Y-AXIS FREQUENCY RESPONSE RATING 2.0 HERTZ MINIMUM AND 8000000.0 HERTZ MAXIMUM
Z-AXIS FREQUENCY RESPONSE RATING 6.0 HERTZ MINIMUM AND 5000000.0 HERTZ MAXIMUM
AMPLIFIER INPUT IMPEDANCE RATING PROVISION PROVIDED
X-AXIS INPUT IMPEDANCE RATING 5.6 MEGOHMS NOMINAL
Y-AXIS INPUT IMPEDANCE RATING 300.0 KILOHMS NOMINAL
Z-AXIS INPUT IMPEDANCE RATING 56.0 KILOHMS NOMINAL
CALIBRATED SCREEN SCALE NOT INCLUDED
TRACE STORAGE TUBE NOT INCLUDED
CAMERA RECORDING DEVICE ACCOMMODATION NOT PROVIDED
CURRENT TYPE AC
VOLTAGE RATING 100.0 VOLTS MINIMUM AND 130.0 VOLTS MAXIMUM
FREQUENCY RATING 50.0 HERTZ MINIMUM AND 400.0 HERTZ MAXIMUM
PHASE SINGLE
OVERALL LENGTH 16.641 INCHES NOMINAL
OVERALL WIDTH 12.594 INCHES NOMINAL
OVERALL HEIGHT 14.906 INCHES NOMINAL
MOUNTING METHOD TABLE
MANUFACTURERS CODE 81349
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE MIL0-15458A

Restrictions/Controls & Freight Information | NSN 6625-00-668-9461

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:QStrategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.”
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061700 ELEC APPLIANCES/INSTRUMENTS NOI
Less than car load rating M 85
Less than truck load rating W Rating Variable
Water commodity Code 658 unknown
Originating Activity Code XX
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Y Protected cargo, other than above, including sensitive cargo requiring hand-to-hand receipt and/or security precautions.
Special Handling Code 5 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable