Product Details | DIGITAL READOUT ELECTRONIC COUNTER

6625-01-009-4950 An instrument used to count the frequency of recurrent electronic events and display the count on the panel of the instrument in numeric form. May also include facilities for a readout printed on tape. May include facilities for a very accurate output which can be used as a secondary transfer standard. It can be used to measure frequency, period, time interval, phase angle, frequency ratio, and for multiple period averaging. See also COUNTER, ELECTRONIC, DIGITAL and INDICATOR, DIGITAL DISPLAY.

Part Alternates: 351C, 6625-01-009-4950, 01-009-4950, 6625010094950, 010094950

Instruments and Laboratory Equipment | Electrical and Electronic Properties Measuring and Testing Instruments

Supply Group (FSG) NSN Assign. NIIN
66 11 SEP 1975 01-009-4950

Cross Reference | NSN 6625-01-009-4950

Part Number Cage Code Manufacturer
351C 34257 EIP MICROWAVE INC

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 6625-01-009-4950

Technical Data | NSN 6625-01-009-4950

Characteristic Specifications
MEASUREMENT TYPE FREQUENCY
FREQUENCY RANGE 0.000 TO 18.000 GIGAHERTZ OVERALL
ACCURACY RATING PORM 1 COUNT PORM TIME BASE STABLITY IN ALL BANDS
DISPLAY TYPE NUMERIC READOUT TUBE
DISPLAY DIGIT QUANTITY 11
DISPLAY UNITS INDICATOR INCLUDED
DISPLAY POSITIONED DECIMAL POINT PROVIDED
REMOTE CONTROL PROVISIONS INCLUDED
SOLID STATE FEATURE INCLUDED
ELECTRICAL CONNECTION QUANTITY 1 AND 2
FREQUENCY RATING 50.0 HERTZ MINIMUM AND 60.0 HERTZ MAXIMUM
PHASE SINGLE
WATTAGE RATING IN WATTS 90.0
INTERNAL BATTERY ACCOMMODATION NOT INCLUDED
INCLOSURE MATERIAL AND LOCATION METAL CASE
OVERALL LENGTH 17.120 INCHES NOMINAL
OVERALL WIDTH 19.000 INCHES NOMINAL
OVERALL HEIGHT 4.000 INCHES NOMINAL
MOUNTING METHOD BENCH
PLUG-IN UNITS PROVISION NOT INCLUDED
STANDARD FREQUENCY OUTPUT FEATURE INCLUDED
OUTPUT FREQUENCY RATING 5.0 MEGAHERTZ NOMINAL
FREQUENCY ACCURACY/STABILITY 5 PARTS PER 1,000,000,000 PER 24 HOURS
MANUFACTURERS CODE 34257
DESIGN CONTROL REFERENCE 351C

Restrictions/Controls & Freight Information | NSN 6625-01-009-4950

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:QStrategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.”
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061700 ELEC APPLIANCES/INSTRUMENTS NOI
Less than car load rating P 77.5
Less than truck load rating W Rating Variable
Water commodity Code 72D unknown
Originating Activity Code SE San Antonio Air Logistics Center
Kelly AFB, TX 78241-5000
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity
Air Special Handling Q Extremely fragile items including delicate instruments.
Special Handling Code Q unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable