Product Details | NOISE LEVEL METER

6625-01-126-7497 An instrument which measures the level of continuous noise present in amplifier and/or receiver circuits with reference to a fixed level of signal generated by a separate noise source. It is designed to measure noise levels over a wide band of frequencies including radio and video frequencies, and is normally calibrated in decibels relative to a specified r.m.s. voltage summation across a specified impedance, or in decibels relative to a specified noise power level. If only audio frequency range, see METER, AUDIO LEVEL.

Part Alternates: 7370, 73704881001010811, 7370-488-100-101-08-11, 6625-01-126-7497, 01-126-7497, 6625011267497, 011267497

Instruments and Laboratory Equipment | Electrical and Electronic Properties Measuring and Testing Instruments

Supply Group (FSG) NSN Assign. NIIN
66 17 FEB 1982 01-126-7497

Drawings & Photos | NSN 6625-01-126-7497


Demand History | NSN 6625-01-126-7497

Part Number Request Date QTY Origin
7370 2016-10-300 100 us

Cross Reference | NSN 6625-01-126-7497

Part Number Cage Code Manufacturer
7370 00752 EDO CORPORATION DIV EDO CORPORATION AP&T
7370-488-100-101-08-11 00752 EDO CORPORATION DIV EDO CORPORATION AP&T

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 6625-01-126-7497

Technical Data | NSN 6625-01-126-7497

Characteristic Specifications
INSTALLATION DESIGN RACK
CIRCUIT CURRENT FOR WHICH DESIGNED AC
OPERATING VOLTAGE RATING IN VOLTS 115.0 AC MINIMUM AND 230.0 AC MAXIMUM
FREQUENCY RATING 50.0 HERTZ MINIMUM AND 400.0 HERTZ MAXIMUM
PHASE SINGLE
INTERFACE COMPATIBILITY IEEE-488
STYLE DESIGNATOR D1 RECTANGULAR OR SQUARE
OVERALL HEIGHT 5.250 INCHES NOMINAL
OVERALL LENGTH 17.125 INCHES NOMINAL
OVERALL WIDTH 13.250 INCHES NOMINAL
SPECIAL FEATURES 10 WATTS; OPERATING TEMPERATURE: 5.0 TO 50.0 DEG C; IF INPUT (REAR PANEL) BNC FEMALE; VIDEO RECORDER AND ALL OPTIONS OUTPUTS (REAR PANEL) AMPHENOL 57-20240-1; OPTIONS ARE: IEEE 488 INTERFACE, BROAD BAND FREQUENCY RANGE; RANGE EXTENDER TO 29.9 DB OUTPUT; RACK MOUNTING
III UNIT OF ISSUE WEIGHT 15.00 POUNDS
MANUFACTURERS CODE 00752
DESIGN CONTROL REFERENCE 7370-488-100-101-08-11

Restrictions/Controls & Freight Information | NSN 6625-01-126-7497

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:BMunitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.)
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061700 ELEC APPLIANCES/INSTRUMENTS NOI
Less than car load rating P 77.5
Less than truck load rating W Rating Variable
Water commodity Code 658 unknown
Originating Activity Code SE San Antonio Air Logistics Center
Kelly AFB, TX 78241-5000
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity
Air Special Handling Z No special handling required.
Special Handling Code Z unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable