Product Details | CURRENT-VOLTAGE STANDARD

6625-01-175-1192 An item designed to produce an alternating current, direct current, and electromotive force with high degree of accuracy. It serves as a standard of calibration for AMMETER(S), VOLTMETER(S), WATTMETER(S), and similar devices that require accurate voltage and/or current inputs for calibration purposes. See also VOLTAGE STANDARD. For items whose outputs are used to operate other electrical or electronic equipment, see POWER SUPPLY.

Part Alternates: AA50749, A-A-50749, U45516, U455-16, 752A, 6625-01-175-1192, 01-175-1192, 6625011751192, 011751192

Instruments and Laboratory Equipment | Electrical and Electronic Properties Measuring and Testing Instruments

Supply Group (FSG) NSN Assign. NIIN
66 27 MAR 1984 01-175-1192

Cross Reference | NSN 6625-01-175-1192

Part Number Cage Code Manufacturer
752A 89536 FLUKE CORPORATION
A-A-50749 58536 FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES
U455-16 F5326 ETAT MAJOR DE L'ARMEE DE TERRE

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 6625-01-175-1192

Technical Data | NSN 6625-01-175-1192

Characteristic Specifications
ELECTROMOTIVE FORCE PRODUCTION METHOD ELECTRONIC
UNIT TYPE ENCASED
OVERALL LENGTH 23.750 INCHES NOMINAL
OVERALL WIDTH 8.690 INCHES NOMINAL
OVERALL HEIGHT 7.530 INCHES NOMINAL
TERMINAL QUANTITY 10
TERMINAL TYPE BINDING POST
PORTABILITY NONPORTABLE
SPECIAL FEATURES FOR DC VOLTAGE RATIO ACCURACY;2 DIVIDER OUTPUTS:10:1 AND 100:1;INCLUDES INTERNAL SWITCHING FOR CALIBRATING THE 100MV,1V,10V,100V AND 1000V RANGES OF A VOLTAGE CALIBRATOR TO A 10V REFERENCE SOURCE
III UNPACKAGED UNIT WEIGHT 18.500 POUNDS
MANUFACTURERS CODE 58536
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE A-A-50749
MANUFACTURERS CODE 89536
DESIGN CONTROL REFERENCE 752A

Restrictions/Controls & Freight Information | NSN 6625-01-175-1192

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061700 ELEC APPLIANCES/INSTRUMENTS NOI
Less than car load rating M 85
Less than truck load rating J 100.2
Water commodity Code 738 unknown
Originating Activity Code SE San Antonio Air Logistics Center
Kelly AFB, TX 78241-5000
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo 3 Electrostatic Sensitive Device (ESD), subject to damage caused by electrostatic discharge. (See DoD 4500.32-R, Volume 1, Appendix A, Section I for additional information on ESD devices).

Management | NSN 6625-01-175-1192

Category Code Description
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Materiel Management Aggregation CodeRHTG:AUTO TEST EQUIPMENT/AUTO TEST SYSTEMS (ATE/ATS) (FSC RESIDUAL MMAC)
Budget CodeY variousO & M:AF centrally procured equipment items. They are separate, primary end items (other than the weapon system itself) needed by a user to perform an assigned mission. They are nonexpendable items (ERRCD NF or ND) which are not consumed in use, and they do not lose their original identity during periods of use by incorporation into, or attachment to another assembly.
Source of SupplyFLZWarner Robins Air Logistics Center
Robins AFB, GA 31098-5609
AgencyDFDepartment of the Air Force
Service OrganizationLLead Service - 22 (Repairable)
ReparabilitySAF Equipment Management System (AFEMS)
Acquisition Advice CodesVTERMINAL ITEM # Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each