Product Details | TEST LEAD

6625-01-203-1035 A definite length of wire or cable with a CLIP (1), ELECTRICAL; CONNECTOR, PLUG, ELECTRICAL; CONNECTOR, RECEPTACLE, ELECTRICAL; JACK, TELEPHONE; PLUG, TELEPHONE; JACK, TIP; PLUG, TIP; or the like on one or both ends, and PROD, TEST on either end but not both ends. Active electronic components such as Capacitors, ELECTRON TUBE, Resistors, Semiconductor devices, and the like may be mounted into and included with LEAD, TEST for attenuation or amplification purposes. May or may not include accessories, such as CLIP (1), ELECTRICAL; TIP, TEST PROD; PROD, TEST; and TEST LEAD ATTACHMENT. For items consisting of more than one LEAD, TEST see LEAD SET, TEST. For items designed for direct attachment to a LEAD, TEST see PROD, TEST. For items designed for indirect attachment to a LEAD, TEST see TEST LEAD ATTACHMENT. For items not specifically designed for test purposes see LEAD, ELECTRICAL.

Part Alternates: C1024313, C10243-13, 1680842, 168084-2, 6625-01-203-1035, 01-203-1035, 6625012031035, 012031035, 726101120

Instruments and Laboratory Equipment | Electrical and Electronic Properties Measuring and Testing Instruments

Supply Group (FSG) NSN Assign. NIIN
66 10 MAR 1985 01-203-1035

Drawings & Photos | NSN 6625-01-203-1035


Cross Reference | NSN 6625-01-203-1035

Part Number Cage Code Manufacturer
168084-2 18117 VIRGINIA PANEL CORPORATION
726101120 18117 VIRGINIA PANEL CORPORATION
C10243-13 81755 LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN AERONAUTICS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 6625-01-203-1035

Technical Data | NSN 6625-01-203-1035

Characteristic Specifications
CONDUCTOR FORM STRANDED ALL CONDUCTORS
MATERIAL COPPER CORE CONDUCTOR ALL CONDUCTORS PLASTIC 1ST POSITION PRIMARY INSULATION ALL CONDUCTORS
ROUND CONDUCTOR SIZE 24 AWG ALL CONDUCTORS
STRAND QUANTITY PER CONDUCTOR 19 ALL CONDUCTORS
STRAND AWG SIZE PER CONDUCTOR 36 ALL CONDUCTORS
CROSS-SECTIONAL SHAPE STYLE 6 ROUND
CROSS SECTION OUTSIDE DIAMETER 0.275 INCHES NOMINAL
TERMINATION TYPE PROD TERMINAL 1ST END ALL CONDUCTORS UNPROCESSED 2ND END ALL CONDUCTORS
III PRECIOUS MATERIAL GOLD
III PRECIOUS MATERIAL AND LOCATION SIGNAL PIN CONTACT SURFACE GOLD

Restrictions/Controls & Freight Information | NSN 6625-01-203-1035

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Precious Metals Indicator Code:GItem contains gold
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061700 ELEC APPLIANCES/INSTRUMENTS NOI
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 658 unknown
Originating Activity Code TH Defense Supply Center Columbus
Columbus, OH 43215
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable