Product Details | SIGNAL GENERATOR

6625-01-223-9873 An instrument which produces a continuous audio and/or radio frequency voltage, and which is designed for test purposes only. It may provide an output at one or more fixed frequencies or be continuously variable over one or more bands. The fixed frequency type is distinguished from CALIBRATOR, FREQUENCY in that it is a voltage source and is not primarily intended for checking frequencies from other sources. Excludes GENERATOR, INTERFERENCE.

Part Alternates: 2400, 6625-01-223-9873, 01-223-9873, 6625012239873, 012239873

Instruments and Laboratory Equipment | Electrical and Electronic Properties Measuring and Testing Instruments

Supply Group (FSG) NSN Assign. NIIN
66 01-223-9873

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 6625-01-223-9873

Technical Data | NSN 6625-01-223-9873

Characteristic Specifications
FREQUENCY RANGE RATING 0.300 TO 999.999 HERTZ AND 1.000 TO 999.999 KILOHERTZ AND 1.000 TO 30.000 MEGAHERTZ
FREQUENCY BAND QUANTITY 8
CALIBRATION ACCURACY RATING PORM 2 PCT OF FULL SCALE ON BANDS1 THRU 7,PORM 3.5 PCT OF FULL SCALE ON BAND 8
CALIBRATED SIGNAL OUTPUT RANGE LESS THAN 2.0 MV TO 15.0 VOLTS INTO 50.0 OHMS
OUTPUT IMPEDANCE RATING 50.0 OHMS NOMINAL
MODULATOR LOCATION INTERNAL
MODULATION TYPE AM AND FM AND KEY AND PULSE AND SQUARE WAVE
MODULATED FREQUENCY RATING 0.3 HERTZ NOMINAL AND 300.0 KILOHERTZ NOMINAL
MODULATION DEGREE 100.0 PERCENT MAXIMUM
CURRENT TYPE AC
VOLTAGE RATING 90.0 VOLTS MINIMUM AND 264.0 VOLTS MAXIMUM
FREQUENCY RATING 50.0 HERTZ MINIMUM AND 400.0 HERTZ MAXIMUM
PHASE SINGLE
INTERNAL BATTERY ACCOMMODATION NOT INCLUDED
CASE MATERIAL METAL
CASE SURFACE TREATMENT PAINTED
OVERALL LENGTH 16.625 INCHES NOMINAL
OVERALL WIDTH 11.500 INCHES NOMINAL
OVERALL HEIGHT 5.250 INCHES NOMINAL
MOUNTING TYPE BENCH

Restrictions/Controls & Freight Information | NSN 6625-01-223-9873

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Category Code Description
No Freight Information