Product Details | DIGITAL READOUT ELECTRONIC COUNTER

6625-01-270-7782 An instrument used to count the frequency of recurrent electronic events and display the count on the panel of the instrument in numeric form. May also include facilities for a readout printed on tape. May include facilities for a very accurate output which can be used as a secondary transfer standard. It can be used to measure frequency, period, time interval, phase angle, frequency ratio, and for multiple period averaging. See also COUNTER, ELECTRONIC, DIGITAL and INDICATOR, DIGITAL DISPLAY.

Part Alternates: 5316B003, 5316B-003, 5316BOPT003, 5316BOPT-003, 6625-01-270-7782, 01-270-7782, 6625012707782, 012707782

Instruments and Laboratory Equipment | Electrical and Electronic Properties Measuring and Testing Instruments

Supply Group (FSG) NSN Assign. NIIN
66 13 JAN 1988 01-270-7782

Cross Reference | NSN 6625-01-270-7782

Part Number Cage Code Manufacturer
5316B-003 1LQK8 KEYSIGHT TECHNOLOGIES, INC.
5316BOPT-003 28480 HEWLETT-PACKARD COMPANY DBA HEWLETT-PACKARD CO. OR HP

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 6625-01-270-7782

Technical Data | NSN 6625-01-270-7782

Characteristic Specifications
MEASUREMENT TYPE FREQUENCY AND PERIOD AVERAGE AND RATIO AND TIME INTERVAL AND TOTALIZING
FREQUENCY RANGE 50.000 TO 1000.000 MEGAHERTZ OVERALL
GATE TIME 0.0 SECONDS MINIMUM AND 10.0 SECONDS MAXIMUM
SENSITIVITY RATING 15 MV RMS SINE WAVE-650 MHZ,75 MV RMS SINE WAVE-1000 MHZ
DISPLAY TYPE NUMERIC READOUT TUBE
DISPLAY DIGIT QUANTITY 8
CURRENT TYPE AC
VOLTAGE RATING 100.0 VOLTS MINIMUM AND 240.0 VOLTS MAXIMUM
FREQUENCY RATING 48.0 HERTZ MINIMUM AND 66.0 HERTZ MAXIMUM
OVERALL LENGTH 16.500 INCHES NOMINAL
OVERALL WIDTH 8.375 INCHES NOMINAL
OVERALL HEIGHT 3.500 INCHES NOMINAL
MOUNTING METHOD BENCH
MANUFACTURERS CODE 1LQK8
DESIGN CONTROL REFERENCE 5316B-003

Restrictions/Controls & Freight Information | NSN 6625-01-270-7782

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:QStrategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.”
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061700 ELEC APPLIANCES/INSTRUMENTS NOI
Less than car load rating J 100.2
Less than truck load rating W Rating Variable
Water commodity Code 658 unknown
Originating Activity Code SE San Antonio Air Logistics Center
Kelly AFB, TX 78241-5000
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity
Air Special Handling Z No special handling required.
Special Handling Code Z unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable