Product Details | TELECOMMUNICATION SYSTEM TEST SET

6625-01-301-0751 A test set designed for use in examining a telecommunication system or subsystem, and providing discreet evaluation of its performance. Its testing capabilities are multiapplication and not limited to measuring single performance characteristics. provides the facilities for voice-grade, program and/or data line testing.

Part Alternates: 4653B, 6625-01-301-0751, 01-301-0751, 6625013010751, 013010751

Instruments and Laboratory Equipment | Electrical and Electronic Properties Measuring and Testing Instruments

Supply Group (FSG) NSN Assign. NIIN
66 24 MAY 1989 01-301-0751

Cross Reference | NSN 6625-01-301-0751

Part Number Cage Code Manufacturer
4653B 10110 SCIENTIFIC ATLANTA INC

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 6625-01-301-0751

Technical Data | NSN 6625-01-301-0751

Characteristic Specifications
TEST TYPE FOR WHICH DESIGNED PROVIDES TEST DATA PATTERNS; MEASURES BIT ERRORS
ELECTRICAL POWER SOURCE RELATIONSHIP OPERATING
AC VOLTAGE RATING 115.0 VOLTS MINIMUM AND 220.0 VOLTS MAXIMUM
FREQUENCY RATING 50.0 HERTZ MINIMUM AND 60.0 HERTZ MAXIMUM
PHASE SINGLE
INCLOSURE FEATURE SINGLE ITEM W/HOUSING
HEIGHT 5.250 INCHES NOMINAL
LENGTH 15.000 INCHES NOMINAL
WIDTH 13.000 INCHES NOMINAL
SPECIAL FEATURES STATION BATTERY MINUS 22 TO MINUS60V DC POSITIVE GROUND,50 WATTS; INTERNAL CLOCK; CRYSTAL SOURCE; BLUE; IEEE488 OR RS-232C
III END ITEM IDENTIFICATION FT3C FIBER OPTIC LIGHT WAVE BAY
MANUFACTURERS CODE 10110
DESIGN CONTROL REFERENCE 4653B

Restrictions/Controls & Freight Information | NSN 6625-01-301-0751

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:QStrategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.”
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
No Freight Information