Product Details | OSCILLOSCOPE

6625-01-318-5667 A test instrument which is designed to give visual indications on an LCD display or a cathode ray tube of instantaneous values and variations in electrical voltage. It can also be used to indicate any quantity which can be converted into terms of electrical potential. It may include an integral pulse generator, the output of which can be used to trigger an external component; be triggered by pulses from an external source, or it may utilize an LCD display or a special type of multigun cathode ray tube and circuitry which permits a trace(s) to be sustained and displayed indefinitely, and the trace(s) may be erased when desired. For items which are not separable and operable when detached from equipment of which they are a part (built into operational equipment), see INDICATOR (2) (as modified); MONITOR (as modified); and RECORDER (as modified). See also OSCILLOGRAPH.

Part Alternates: VP5740POPT1, VP5740P-OPT1, 6625-01-318-5667, 01-318-5667, 6625013185667, 013185667

Instruments and Laboratory Equipment | Electrical and Electronic Properties Measuring and Testing Instruments

Supply Group (FSG) NSN Assign. NIIN
66 20 APR 1990 01-318-5667

Cross Reference | NSN 6625-01-318-5667

Part Number Cage Code Manufacturer
VP5740P-OPT1 61058 PANASONIC CORPORATION OF NORTH AMERICA

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 6625-01-318-5667

Technical Data | NSN 6625-01-318-5667

Characteristic Specifications
SCREEN SIZE 7 IN. SQUARE
BEAM QUANTITY 4
SWEEP CIRCUITS INCLUDED
GENERATOR DRIVEN FEATURE INCLUDED
SWEEP CIRCUIT TYPE HORIZONTAL AND VERTICAL
SINGLE TRIGGER SWEEP DURATION 0.0 SECONDS MINIMUM AND 50.0 SECONDS MAXIMUM
TRIGGER SWEEP POLARITY SWITCH NOT INCLUDED
TRIGGER SWEEP MARKER INTERVALS 5 NANOSEC TO 50 MILLISEC PER DIV
EXPANDED SWEEP NOT PROVIDED
AMPLIFIER DEFLECTION SENSITIVITY PROVISION PROVIDED
INPUT INTENSITY MODULATION FEATURE NOT PROVIDED
FREQUENCY RESPONSE RATING PROVIDED
CALIBRATED SCREEN SCALE INCLUDED
TRACE STORAGE TUBE INCLUDED
VIEWING SCREEN VOLTAGE RATING 20.0 KILOVOLTS
PLUG IN UNIT FUNCTION AND QUANTITY EXPANSION MEMORY 1
CAMERA RECORDING DEVICE ACCOMMODATION NOT PROVIDED
CURRENT TYPE AC
VOLTAGE RATING 100.0 VOLTS MINIMUM AND 240.0 VOLTS MAXIMUM
FREQUENCY RATING 50.0 HERTZ MINIMUM AND 60.0 HERTZ MAXIMUM
OVERALL LENGTH 19.900 INCHES NOMINAL
OVERALL WIDTH 12.200 INCHES NOMINAL
OVERALL HEIGHT 5.900 INCHES NOMINAL
ACCESSORY COMPONENTS AND QUANTITY PROBE 2; SCALE LAMP 1; FUSE 1; INSTRUCTION MANUAL 1
SPECIAL FEATURES DIGITAL; 100 MHZ SAMPLING CLOCK; 10K WORD MEMORY; DC-35 MHZ STORAGE; GP-IB INTERFACE (EXTERNAL CONTROL); 10 PROGRAMS OF 100 STEPS; X-Y RECORDER; 4 WAVEFORM DISPLAY; MEASUREMENTS: LOW-LEVEL SIGNAL NOISES AND WAVEFORM DISTORTIONS; OPT 1 IS EXPANSION MEMORY (VQ-051P40); 8X10 DIV CRT; DEFLECTION FACTORS: VERTICAL: 5MV TO 5V/DIV,IN 1-2-5 SEQUENCE; X-Y: 5 MV TO 5V/DIV.; TIME BASE: 50 NS TO 50 SEC/DIV SWEEP TIME; CALIBRATOR 0.3V,1 KHZ POSITIVE-GOING SQUARE WAVE; BANDWIDTH: CRT: DC-100 MHZ NON-STORAGE,STORAGE: DC-35 MHZ; X-Y: DC-35 MHZ BANDWIDTH; DUAL-TRACE; DATA DISPLAYED AS DOTS,WITH LINEAR INTERPOLATION,OR WITH SINE INTERPOLATION
III END ITEM IDENTIFICATION F110GE100 ENG SERD 5042
MANUFACTURERS CODE 61058
DESIGN CONTROL REFERENCE VP5740P-OPT1

Restrictions/Controls & Freight Information | NSN 6625-01-318-5667

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:QStrategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.”
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061700 ELEC APPLIANCES/INSTRUMENTS NOI
Less than car load rating P 77.5
Less than truck load rating J 100.2
Water commodity Code 738 unknown
Originating Activity Code SE San Antonio Air Logistics Center
Kelly AFB, TX 78241-5000
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Q Extremely fragile items including delicate instruments.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo 3 Electrostatic Sensitive Device (ESD), subject to damage caused by electrostatic discharge. (See DoD 4500.32-R, Volume 1, Appendix A, Section I for additional information on ESD devices).