Product Details | TELECOMMUNICATION SYSTEM TEST SET

6625-01-345-1216 A test set designed for use in examining a telecommunication system or subsystem, and providing discreet evaluation of its performance. Its testing capabilities are multiapplication and not limited to measuring single performance characteristics. provides the facilities for voice-grade, program and/or data line testing.

Part Alternates: F5500000A11110, F-5500-000A-11110, 6625-01-345-1216, 01-345-1216, 6625013451216, 013451216

Instruments and Laboratory Equipment | Electrical and Electronic Properties Measuring and Testing Instruments

Supply Group (FSG) NSN Assign. NIIN
66 12 SEP 1991 01-345-1216

Cross Reference | NSN 6625-01-345-1216

Part Number Cage Code Manufacturer
F-5500-000A-11110 79824 PHOENIX MICROSYSTEMS INC

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 6625-01-345-1216

Technical Data | NSN 6625-01-345-1216

Characteristic Specifications
TEST TYPE FOR WHICH DESIGNED INTERFACE CIRCUITRY
ELECTRICAL POWER SOURCE RELATIONSHIP OPERATING
AC VOLTAGE RATING 90.0 VOLTS MINIMUM AND 130.0 VOLTS MAXIMUM
FREQUENCY RATING 45.0 HERTZ MINIMUM AND 450.0 HERTZ MAXIMUM
INCLOSURE FEATURE SINGLE ITEM W/CARRYING CASE
SPECIAL FEATURES USER CLOCK 50 B/S TO 13 MB/S; REMOTE CONTROL RS-232C AND IEE-488 BUS INTERFACES
III FUNCTIONAL DESCRIPTION PROVIDES INTERNAL CLOCK SOURCE; SYNCHRONIZES W/EXTERNAL CLOCK SOURCES; GENERATES PROGRAMMABLE USER BIT PATTERNS; PROVIDES INDICATORS FOR INTERFACE CONTROL SIGNAL STATUS; USER SELECTABLEBIT PATTERN SYNCHRONIZATION CRITERIA; PROVIDES AVAILABILITY FOR INJECTING ERROR RATES; PROVIDES INDICATIONS OF TEST RESULTS; CAPABLE OF MEASURING NETWORK LOOP DELAY AND JITTER; REMOTELY CONTROLLABLE VIA RS-232C

Restrictions/Controls & Freight Information | NSN 6625-01-345-1216

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:BMunitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.)
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061700 ELEC APPLIANCES/INSTRUMENTS NOI
Less than car load rating
Less than truck load rating J 100.2
Water commodity Code 658 unknown
Originating Activity Code SU Ogden Air Logistics Center
Hill AFB, UT 84056-5609
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 6625-01-345-1216

Category Code Description
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Materiel Management Aggregation CodeTASU:TRAINING AIDS AND DEVICES
Budget CodeY variousO & M:AF centrally procured equipment items. They are separate, primary end items (other than the weapon system itself) needed by a user to perform an assigned mission. They are nonexpendable items (ERRCD NF or ND) which are not consumed in use, and they do not lose their original identity during periods of use by incorporation into, or attachment to another assembly.
Source of SupplyFGZOgden Air Logistics Center
Hill AFB, UT 84056-5609
AgencyDFDepartment of the Air Force
Service OrganizationLLead Service - 22 (Repairable)
ReparabilitySAF Equipment Management System (AFEMS)
Acquisition Advice CodesVTERMINAL ITEM # Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each