Product Details | INSTRUMENT SHUNT

6625-01-477-1180 A fixed precision resistor consisting of a bar or bars of metal specifically designed for use in parallel with a basic direct current instrument to permit determination of current values exceeding the actual range of the instrument itself.

Part Alternates: EL9800, EL-9800, EL9800PD, EL-9800PD, 6625-01-477-1180, 01-477-1180, 6625014771180, 014771180

Instruments and Laboratory Equipment | Electrical and Electronic Properties Measuring and Testing Instruments

Supply Group (FSG) NSN Assign. NIIN
66 31 JUL 2000 01-477-1180

Cross Reference | NSN 6625-01-477-1180

Part Number Cage Code Manufacturer
EL-9800 8X117 HAROUTUNIAN, ARAMAIS DBA PRECISION MEASUREMENTS
EL-9800PD 8X117 HAROUTUNIAN, ARAMAIS DBA PRECISION MEASUREMENTS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 6625-01-477-1180

Technical Data | NSN 6625-01-477-1180

Characteristic Specifications
VOLTAGE DROP IN MILLIVOLTS 200.0 NOMINAL
CURRENT RATING AND TYPE 10.0 AMPERES MINIMUM AC AND 100.0 AMPERES MAXIMUM AC
USAGE DESIGN EXTERNAL
ELEMENT MATERIAL HIGH THERMAL CONDUCTIVITY SILICON POTTING COMPOUND
SPECIAL FEATURES MFG NAME IS AC CURRENT SHUNT SET. EACH SET OF THE EL-9800 CONSISTS OF THE FOLLOWING SHUNTS, EL-9810, EL9830, EL-9850, EL-9880. THIS CURRENT SHUNT SET IS A SET OF COAXIAL AC CURRENT SHUNTS DESIGNED FOR CALIBRATING TRANSCONDUCTANCE AMPLIFIERS AND OTHER CURRENT CALIBRATING DEVICES WITH A RANGE OF 10 THROUGH 100 AMPERES AND A FREQUENCY RANGE OF DC TO 100KHZ. THIS SET IS ENCASED IN A STURDY, RIGID, AIR AND WATER TIGHT CARRING CASE, HAS AN ADJUSTABLE HEIGHT SUPPORT STAND. EACH SHUNT HAS AN LC MALE CONNECTOR FOR THE INPUT, LC FEMALE CONNECTOR FOR OUTPUT, AND A BNC FEMALE FOR THE VOLTAGE SENSE TERMINAL
III END ITEM IDENTIFICATION USED IN PEML LABS TO CALIBRATE TEST EQUIPMENT

Restrictions/Controls & Freight Information | NSN 6625-01-477-1180

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061700 ELEC APPLIANCES/INSTRUMENTS NOI
Less than car load rating P 77.5
Less than truck load rating J 100.2
Water commodity Code 738 unknown
Originating Activity Code TK HQ AFMC/GLSC 401 SCM/GUMB
Wright-Patterson AFB, OH 45433-5000
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Q Extremely fragile items including delicate instruments.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 6625-01-477-1180

Category Code Description
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Materiel Management Aggregation CodeQCTG:ELECTRICAL AND ELECTRONIC PROPERTIES MEASURING AND TESTING
Budget CodeY variousO & M:AF centrally procured equipment items. They are separate, primary end items (other than the weapon system itself) needed by a user to perform an assigned mission. They are nonexpendable items (ERRCD NF or ND) which are not consumed in use, and they do not lose their original identity during periods of use by incorporation into, or attachment to another assembly.
Source of SupplyFLZWarner Robins Air Logistics Center
Robins AFB, GA 31098-5609
AgencyDFDepartment of the Air Force
Service OrganizationLLead Service - 22 (Repairable)
ReparabilitySAF Equipment Management System (AFEMS)
Acquisition Advice CodesJNOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each