Product Details | TEST PROBE-LEAD ASSEMBLY

6625-01-577-8933 A definite length of wire or cable with a CLIP, ELECTRICAL; CONNECTOR, PLUG, ELECTRICAL; CONNECTOR, RECEPTACLE, ELECTRICAL; JACK, TELEPHONE; JACK, TIP; PLUG, TIP; or the like on one or both ends and PROBE, TEST on either end but not on both ends. Electronic components, such as capacitors, electron tube, resistors, semiconductor devices, and the like are mounted into and included with the item for attenuation or amplification purposes. May or may not include accessories such as CLIP, ELECTRICAL; PROBE, TEST; TEST PROBE ATTACHMENT. For items without electronic components see, LEAD, TEST. For items designed for direct attachment to a PROBE-LEAD ASSEMBLY, TEST see PROBE, TEST. For items designed for indirect attachment to a PROBE-LEAD ASSEMBLY, TEST see TEST PROBE ATTACHMENT.

Part Alternates: 6494, 6625-01-577-8933, 01-577-8933, 6625015778933, 015778933

Instruments and Laboratory Equipment | Electrical and Electronic Properties Measuring and Testing Instruments

Supply Group (FSG) NSN Assign. NIIN
66 22 SEP 2009 01-577-8933

Cross Reference | NSN 6625-01-577-8933

Part Number Cage Code Manufacturer
6494 4U744 FLUKE ELECTRONICS CORPORATION DBA FLUKE

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 6625-01-577-8933

Technical Data | NSN 6625-01-577-8933

Characteristic Specifications
SPECIAL FEATURES ACCESSORIES (ONE OF EACH) INCLUDED WITH PROBE ARE- GROUND BLADE; GROUND LEAD WITH ALLIGATOR CLIP 22 CM (8.66 INCHES); IC CAPS, 0.8MM, 1.0MM, AND 1.27MM PITCH; INSULATING CAP (GREEN); PROTECTION CAP; SOLID TIP 0.8MM (0.0315 INCHES); SPRING TIP 0.8MM (0.0315 INCHES); SPRUNG HOOK; ADJUSTMENT TOOL; COOPER (CU) PADS; THE READOUT BNC CONNECTOR ENABLES AUTOMATIC RECOGNITION BY SCOPES THAT FEATURE A SENSE RING TO DETECT PROBE ATTENUATION
III PART NAME ASSIGNED BY CONTROLLING AGENCY MODULAR PASSIVE OSCILLOSCOPE PROBE WITH READOUT ACTUATOR

Restrictions/Controls & Freight Information | NSN 6625-01-577-8933

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:QStrategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.”
Electro-static Discharge Susceptible:ANo known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
No Freight Information