Product Details | SIGNAL GENERATOR

6625-01-643-8944 An instrument which produces a continuous audio and/or radio frequency voltage, and which is designed for test purposes only. It may provide an output at one or more fixed frequencies or be continuously variable over one or more bands. The fixed frequency type is distinguished from CALIBRATOR, FREQUENCY in that it is a voltage source and is not primarily intended for checking frequencies from other sources. Excludes GENERATOR, INTERFERENCE.

Part Alternates: AFG3022C , 6625-01-643-8944, 01-643-8944, 6625016438944, 016438944

Instruments and Laboratory Equipment | Electrical and Electronic Properties Measuring and Testing Instruments

Supply Group (FSG) NSN Assign. NIIN
66 2015105 01-643-8944

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 6625-01-643-8944

Technical Data | NSN 6625-01-643-8944

Characteristic Specifications
FREQUENCY RANGE RATING 12.5 TO 25.0 MEGAHERTZ
FIXED FREQUENCY RATING 25.0 MEGAHERTZ
OUTPUT IMPEDANCE RATING 50.0 OHMS NOMINAL
MODULATOR LOCATION ANY ACCEPTABLE
MODULATION TYPE ANY ACCEPTABLE
MODULATION DEGREE 12.5 DEVIATION NOMINAL
CURRENT TYPE DC
VOLTAGE RATING 100.0 VOLTS MINIMUM AND
CASE MATERIAL ANY ACCEPTABLE
CASE SURFACE TREATMENT ANY ACCEPTABLE
OVERALL WIDTH 13.0 INCHES NOMINAL
OVERALL HEIGHT 6.2 INCHES NOMINAL
MOUNTING TYPE ANY ACCEPTABLE
III PART NAME ASSIGNED BY CONTROLLING AGENCY ARBITRARY FUNCTION GENERATOR

Restrictions/Controls & Freight Information | NSN 6625-01-643-8944

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:QStrategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.”
Precious Metals Indicator Code:AItem does not contain precious metal
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
No Freight Information