Product Details | THERMOCOUPLE TEMPERATURE INDICATOR

6685-00-883-4096 An indicator which indicates temperature by means of a thermocouple circuit.

Part Alternates: BH187M4, 6685-00-883-4096, 00-883-4096, 6685008834096, 008834096

Instruments and Laboratory Equipment | Pressure, Temperature, and Humidity Measuring and Controlling Instruments

Supply Group (FSG) NSN Assign. NIIN
66 01 JAN 1962 00-883-4096

Cross Reference | NSN 6685-00-883-4096

Part Number Cage Code Manufacturer
BH187M4 98869 HOWELL INSTRUMENTS, INC.

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 6685-00-883-4096

Technical Data | NSN 6685-00-883-4096

Characteristic Specifications
ELECTRICAL CONNECTION QUANTITY 1
ELECTRICAL CONNECTION IDENTIFYING NUMBER GS02-16S-1P-252(F9)
PRESENTATION TYPE DIAL AND COUNTER
ACCURACY RATING 5.0 DEG CELSIUS SINGLE INDICATOR SINGLE SCALE
SCALE RANGE 0.0 TO 1200.0 DEG CELSIUS SINGLE INDICATOR SINGLE SCALE
POINTER TYPE INDICATING SINGLE POINTER
DISPLAY DIGIT QUANTITY 4
INDIVIDUAL MARKING TURBINE INLET TEMP
CURRENT TYPE AC
AC VOLTAGE RATING 115.0 VOLTS NOMINAL
PHASE SINGLE
FREQUENCY RATING 60.0 HERTZ MINIMUM AND 400.0 HERTZ MAXIMUM
LENGTH 6.000 INCHES NOMINAL
DIAMETER 3.130 INCHES NOMINAL
SPECIAL FEATURES INCREMENTS DIAL 50 DEG C AND DIGITAL READOUT 2 DEG C; RESPONSE RATE 4 SECONDS; SIGNAL INPUT CHROMEL ALUMEL THERMOCOUPLE; IMPEDANCE 300,000 OHMS; POWER 20 VA; WEIGHT 1.65 LBS; INCLUDES POWER FAILURE INDICATOR, OVERTEMPERATURE WARNING LAMP LIGHT AT 980 DEG C; CASE CORROSION PROTECTED AND HERMETICALLY SEALED
III END ITEM IDENTIFICATION 4920-00-674-0206,4920-00-896-0896 AND 4920-00-928-4726 C-130 TURB-INLET TEMPERATURE
III SUPPLEMENTARY FEATURES T.O. 1C-130B-01 AND 5E6-3-47-3
III PART NAME ASSIGNED BY CONTROLLING AGENCY INDICATOR,TURBINE INLET TEMPERATURE

Restrictions/Controls & Freight Information | NSN 6685-00-883-4096

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:BMunitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.)
Electro-static Discharge Susceptible:ANo known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061700 ELEC APPLIANCES/INSTRUMENTS NOI
Less than car load rating M 85
Less than truck load rating W Rating Variable
Water commodity Code 653 unknown
Originating Activity Code XX
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity
Air Special Handling Q Extremely fragile items including delicate instruments.
Special Handling Code Q unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable