NSN 9390-00-032-2546 8014240, 00-032-2546, 000322546
Product Details | PROTECTION BELLOWS
9390-00-032-2546 A nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.20353400020Hardware, Commercial53420023Hardware, Weapon System93900046Miscellaneous Fabricated Nonmetallic Materials
Part Alternates: 8014240, 9390-00-032-2546, 00-032-2546, 9390000322546, 000322546
Nonmetallic Fabricated Materials | Miscellaneous Fabricated Nonmetallic Materials
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 93 | 01 JAN 1963 | 00-032-2546 | 35168 ( BELLOWS, PROTECTION ) |
Cross Reference | NSN 9390-00-032-2546
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 8014240 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 9390-00-032-2546
Technical Data | NSN 9390-00-032-2546
| Characteristic | Specifications |
|---|---|
| MATERIAL | RUBBER,SYNTHETIC,MIL-R-3065,TYPE S,CLASS SC,GRADE 515 |
| DUROMETER HARDNESS RATING | 45.0 MINIMUM AND 55.0 MAXIMUM |
| EXTENDED LENGTH | ANY ACCEPTABLE |
| CONTRACTED LENGTH | ANY ACCEPTABLE |
| NEUTRAL LENGTH | 4.750 INCHES NOMINAL |
| FLANGE BASE | NOT PROVIDED |
| END OUTSIDE DIAMETER | 3.219 INCHES NOMINAL |
| END OUTSIDE LENGTH | 0.130 INCHES NOMINAL |
| LARGE END INSIDE DIAMETER | 2.750 INCHES NOMINAL |
| SMALL END INSIDE DIAMETER | 2.656 INCHES NOMINAL |
| END INSIDE LENGTH | 0.130 INCHES NOMINAL |
| THICKNESS | 0.125 INCHES NOMINAL |
| III FSC APPLICATION DATA | BOOT LAUNCHER SHOCK STRUT |
| MANUFACTURERS CODE | 18876 |
| DESIGN CONTROL REFERENCE | 8014240 |
Restrictions/Controls & Freight Information | NSN 9390-00-032-2546
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Precious Metals Indicator Code: | U | Precious metal type is unknown |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
| Category | Code | Description |
|---|---|---|
| NMF Description | 183780 | TOOLS:BELLOWS IN PKGS |
| Less than car load rating | J | 100.2 |
| Less than truck load rating | J | 100.2 |
| Water commodity Code | 772 | unknown |
| Originating Activity Code | XX | |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | ||
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | 9 | unknonwn |
| HAZMAT | FF | |
| Type of Cargo | Z | No special type of cargo code applicable |