Product Details | PROTECTION BELLOWS

9390-00-051-9405 A nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.20353400020Hardware, Commercial53420023Hardware, Weapon System93900046Miscellaneous Fabricated Nonmetallic Materials

Part Alternates: 300-524119, 9390-00-051-9405, 00-051-9405, 9390000519405, 300524119, 000519405

Nonmetallic Fabricated Materials | Miscellaneous Fabricated Nonmetallic Materials

Supply Group (FSG) NSN Assign. NIIN
93 15 DEC 1967 00-051-9405

Cross Reference | NSN 9390-00-051-9405

Part Number Cage Code Manufacturer
300-524119 28298 SMITH AND SMITH AIRCRAFT CO
300-524119 34574 BOEING COMPANY DBA BOEING
300-524119 82689 TRIANGLE RUBBER CO. INC.
300-524119 85941 MAGELLAN AEROSPACE, NEW YORK, INC. DIV ELLANEF MANUFACTURING
300-524119 89372 ROCKWELL INTERNATIONAL CORP NORTH AMERICAN AIRCRAFT OPNS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 9390-00-051-9405

Technical Data | NSN 9390-00-051-9405

Characteristic Specifications
MATERIAL RUBBER, SYNTHETIC
DUROMETER HARDNESS RATING 25.0 MINIMUM AND 35.0 MAXIMUM
EXTENDED LENGTH 8.630 INCHES NOMINAL
CONTRACTED LENGTH 3.325 INCHES NOMINAL
NEUTRAL LENGTH 4.130 INCHES NOMINAL
FLANGE BASE NOT PROVIDED
END OUTSIDE DIAMETER 0.820 INCHES MINIMUM AND 0.880 INCHES MAXIMUM
END OUTSIDE LENGTH 0.560 INCHES NOMINAL
END INSIDE DIAMETER 0.750 INCHES MINIMUM AND 0.810 INCHES MAXIMUM
END INSIDE LENGTH 0.595 INCHES NOMINAL
THICKNESS 0.035 INCHES NOMINAL
III FSC APPLICATION DATA PEDAL,CONTROL,ACFT
MANUFACTURERS CODE 89372
DESIGN CONTROL REFERENCE 300-524119

Restrictions/Controls & Freight Information | NSN 9390-00-051-9405

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 183780 TOOLS:BELLOWS IN PKGS
Less than car load rating
Less than truck load rating J 100.2
Water commodity Code 772 unknown
Originating Activity Code SE San Antonio Air Logistics Center
Kelly AFB, TX 78241-5000
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 9390-00-051-9405

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Materiel Management Aggregation CodeEVSU:OV-10A BRONCO
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesJNOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesJNOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each