NSN 2530-00-312-0548 44010530, 440105-30, 801E5505
Product Details | STEERING GEAR ARM
2530-00-312-0548 The portion of a steering mechanism that connects the sector shaft to the tie rod(s) or drag link.
Part Alternates: 44010530, 440105-30, 801E5505, 2530-00-312-0548, 00-312-0548, 2530003120548, 003120548
Vehicular Equipment Components | Vehicular Brake, Steering, Axle, Wheel, and Track Components
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 25 | 01 JAN 1961 | 00-312-0548 | 10854 ( ARM, STEERING GEAR ) |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 2530-00-312-0548
Technical Data | NSN 2530-00-312-0548
| Characteristic | Specifications |
|---|---|
| DESIGN TYPE | OFFSET |
| CENTER TO CENTER DISTANCE BETWEEN BALL/BALL STUD HOLE AND SECTOR SHAFT BORE | 8.125 INCHES MINIMUM AND 8.375 INCHES MAXIMUM |
| SECTOR SHAFT MOUNTING END OVERALL WIDTH | 3.000 INCHES NOMINAL |
| SECTOR SHAFT MOUNTING END OVERALL THICKNESS | 1.625 INCHES NOMINAL |
| SECTOR SHAFT MOUNTING END SERRATED BORE | INCLUDED |
| TEETH QUANTITY | 36 |
| SMALL END MAJOR DIAMETER | 1.6739 INCHES NOMINAL |
| SERRATION INCLUDED ANGLE IN DEG | 90.0 |
| TEETH CUT ANGLE IN DEG | 1 DEG 37 MIN |
| SMALL END TEETH DEPTH | 0.0661 INCHES NOMINAL |
| TAPER | 0.750 PER FOOT IN INCHES NOMINAL |
| TAPER LENGTH | 1.625 INCHES NOMINAL |
| COUNTERBORE FEATURE | NOT INCLUDED |
| DRAG LINK END CHARACTERISTIC | W/INTEGRAL BALL |
| DIAMETER | 1.218 INCHES MINIMUM AND 1.228 INCHES MAXIMUM |
| WIDTH | 1.500 INCHES MINIMUM AND 1.562 INCHES MAXIMUM |
| III FSC APPLICATION DATA | VEHICULAR BRAKE,STEERING,AXLE,WHEEL,AND TRACK COMPONENTS |
| MANUFACTURERS CODE | 77640 |
| DESIGN CONTROL REFERENCE | 440105-30 |
Restrictions/Controls & Freight Information | NSN 2530-00-312-0548
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Precious Metals Indicator Code: | U | Precious metal type is unknown |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Category | Code | Description |
|---|---|---|
| NMF Description | 019640 | AUTO STEERING ARMS STEEL |
| Less than car load rating | Q | 70 |
| Less than truck load rating | Q | 70.0 |
| Water commodity Code | 581 | unknown |
| Originating Activity Code | XX | |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | V | Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above. |
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | 9 | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |