NSN 3040-00-225-1443 2584502, 00-225-1443, 002251443
Product Details | SHOULDERED SHAFT
3040-00-225-1443 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Part Alternates: 2584502, 3040-00-225-1443, 00-225-1443, 3040002251443, 002251443
Mechanical Power Transmission Equipment | Miscellaneous Power Transmission Equipment
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | 18 MAR 1970 | 00-225-1443 | 22914 ( SHAFT, SHOULDERED ) |
Drawings & Photos | NSN 3040-00-225-1443
Demand History | NSN 3040-00-225-1443
| Part Number | Request Date | QTY | Origin |
|---|---|---|---|
| 3040-00-225-1443 | 2019-08-227 | 52 | DIBBS |
| 3040-00-225-1443 | 2017-05-142 | 15 | United States |
| 3040-00-225-1443 | 2017-04-110 | 10 | United States |
| 3040-00-225-1443 | 2016-12-351 | 8 | United States |
| 3040-00-225-1443 | 2015-06-177 | 6 | United States |
| 3040-00-225-1443 | 2014-12-343 | 77 | DIBBS |
| 3040-00-225-1443 | 2013-09-267 | 30 | DIBBS |
| 3040-00-225-1443 | 2006-03-70 | 45 | DIBBS |
| 3040-00-225-1443 | 2006-03-61 | 10 | US |
| 3040-00-225-1443 | 2006-01-10 | 78 | DIBBS |
| 3040-00-225-1443 | 2006-01-04 | 78 | DIBBS |
Cross Reference | NSN 3040-00-225-1443
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 2584502 | 80064 | NAVAL SHIP SYSTEMS COMMAND |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
Ernie G.
Honeywell
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
NSNs for Compare ( up to 4 ): Add 3040-00-225-1443
Related Products | NSN 3040-00-225-1443
Technical Data | NSN 3040-00-225-1443
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL COMP 1018 OR STEEL COMP 1117 |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A108 ASSN STD 1ST MATERIAL RESPONSE OR QQ-S-637 FED SPEC 2ND MATERIAL RESPONSE |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END STYLE | 34 THREE CIRCULAR GROOVES |
| FIRST END GROOVE WIDTH | 0.0950 INCHES MINIMUM AND 0.0970 INCHES MAXIMUM |
| FIRST END GROOVE DIAMETER | 0.9740 INCHES MINIMUM AND 0.9940 INCHES MAXIMUM |
| FIRST END DISTANCE FROM END TO GROOVE | 0.085 INCHES NOMINAL |
| FIRST END DIAMETER | 1.1100 INCHES MINIMUM AND 1.1200 INCHES MAXIMUM |
| FIRST END DISTANCE BETWEEN FIRST AND SECOND GROOVE CENTERS | 0.247 INCHES NOMINAL |
| FIRST END DISTANCE BETWEEN SECOND AND THIRD GROOVE CENTERS | 0.257 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 74 TWO CIRCULAR GROOVES, SPLINED AND INTERNALLY THREADED |
| SECOND END GROOVE WIDTH | 0.1750 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 0.9062 INCHES NOMINAL |
| SECOND END DISTANCE FROM END TO GROOVE | 0.5938 INCHES NOMINAL |
| SECOND END DIAMETER | 1.2495 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM |
| SECOND END SPLINE LENGTH | 0.594 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.9630 INCHES MINIMUM AND 0.9730 INCHES MAXIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 1.1230 INCHES MINIMUM AND 1.1240 INCHES MAXIMUM |
| SECOND END INTERNAL THREAD LENGTH | 1.000 INCHES NOMINAL |
| SECOND END DISTANCE BETWEEN FIRST AND SECOND GROOVE CENTERS | 0.762 INCHES NOMINAL |
| SECOND END SPLINE QUANTITY | 10 |
| LARGEST STEP DIAMETER | 1.400 INCHES NOMINAL |
| OVERALL LENGTH | 6.375 INCHES NOMINAL |
| STEP QUANTITY | 15 |
Restrictions/Controls & Freight Information | NSN 3040-00-225-1443
| Category | Code | Description |
|---|---|---|
| Shelf-Life Code: | 0 | Nondeteriorative |
| Hazardous Material Indicator Code | N | There is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials |
| Demilitarization Code: | Q | Strategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.” |
| Controlled Inventory Item Code: | U | UNCLASSIFIED |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Category | Code | Description |
|---|---|---|
| NMF Description | 126900 | POWER TRANS SHAFTING/SHAFTS |
| Less than car load rating | ||
| Less than truck load rating | W | Rating Variable |
| Water commodity Code | 593 | unknown |
| Originating Activity Code | PA | Marine Corps Logistics Base Albany, GA 31704-1128 |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | V | Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above. |
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | 9 | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |
Management | NSN 3040-00-225-1443
Navy
Marines| Category | Code | Description |
|---|---|---|
| Stores Account Code | 1 | Marine Corps Stock Fund Account Item. |
| Combat Essentiality Code | 2 | Non-Critical Repair Part. Repair parts or major components whose failure in an end item will not render the end item inoperative or reduce its effectiveness below the minimum acceptable level of efficiency, and which do not fit the definition of Code 3 or 4 items. |
| Materiel Management Code | B | All CommoditiesDefense Logistics Agency, (DLA,) |
| Echelon Management Code | 2 | ICP/DSSC Marine Corps-managed Recoverability Code D items and Defense Logistics Agency (DLA)/TACOM/GSA) items which the integrated manager has not decontrolled. |
| Echelon Identification Code | B | Consumable Repair Parts |
| Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
| Agency | DM | U.S. Marine Corps |
| Service Organization | M | U.S. Marine Corps |
| Reparability | Z | Nonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code. |
| Acquisition Advice Codes | D | DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |
| Purchasing | QTY UOM |
1 EA : Each |
| Category | Code | Description |
|---|---|---|
| Cognizance Codes | 9B | Navy-owned stocks of DLA material Naval Inventory Control Point, Mechanicsburg |
| Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
| Agency | DN | Department of the Navy |
| Service Organization | N | U.S. Navy |
| Acquisition Advice Codes | D | DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |
| Purchasing | QTY UOM |
1 EA : Each |