NSN 3040-00-707-9778 544011, 00-707-9778, 007079778
Product Details | SHOULDERED SHAFT
3040-00-707-9778 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Part Alternates: 544011, 3040-00-707-9778, 00-707-9778, 3040007079778, 007079778
Mechanical Power Transmission Equipment | Miscellaneous Power Transmission Equipment
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | 01 JAN 1963 | 00-707-9778 | 22914 ( SHAFT, SHOULDERED ) |
Drawings & Photos | NSN 3040-00-707-9778
Demand History | NSN 3040-00-707-9778
| Part Number | Request Date | QTY | Origin |
|---|---|---|---|
| 544011 | 2020-09-259 | 73 | DIBBS |
| 544011 | 2020-08-244 | 350 | DIBBS |
| 544011 | 2020-08-229 | 350 | DIBBS |
| 544011 | 2019-11-329 | 55 | DIBBS |
| 544011 | 2019-11-317 | 55 | DIBBS |
| 3040-00-707-9778 | 2014-01-29 | 14 | DIBBS |
| 3040-00-707-9778 | 2011-07-192 | 20 | MANUAL |
| 544011 | 2011-07-192 | 20 | Hong Kong |
| 544011 | 2011-07-185 | 20 | Malaysia |
| 3040-00-707-9778 | 2010-11-314 | 30 | BE |
| 3040-00-707-9778 | 2009-06-163 | 9 | DIBBS |
| 3040-00-707-9778 | 2006-01-19 | 3 | DIBBS |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 3040-00-707-9778
Technical Data | NSN 3040-00-707-9778
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS6415 ASSN STD SINGLE MATERIAL RESPONSE |
| FIRST END STYLE | 12 EXTERNAL THREADED |
| FIRST END DIAMETER | 0.3430 INCHES MINIMUM AND 0.3437 INCHES MAXIMUM |
| FIRST END EXTERNAL THREAD LENGTH | 0.340 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 18 SPLINED |
| SECOND END DIAMETER | 0.6794 INCHES MINIMUM AND 0.6814 INCHES MAXIMUM |
| SECOND END SPLINE LENGTH | 0.320 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.5417 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 0.6794 INCHES MINIMUM AND 0.6814 INCHES MAXIMUM |
| SECOND END PITCH DIAMETER | 0.5417 INCHES NOMINAL |
| SECOND END SPLINE QUANTITY | 10 |
| LARGEST STEP DIAMETER | 0.373 INCHES MINIMUM AND 0.374 INCHES MAXIMUM |
| OVERALL LENGTH | 2.105 INCHES MINIMUM AND 2.135 INCHES MAXIMUM |
| STEP QUANTITY | 3 |
| SPECIAL FEATURES | SHAFT CENTER 0.240IN.DIA |
| MANUFACTURERS CODE | 73030 |
| DESIGN CONTROL REFERENCE | 544011 |
Restrictions/Controls & Freight Information | NSN 3040-00-707-9778
| Category | Code | Description |
|---|---|---|
| Shelf-Life Code: | 0 | Nondeteriorative |
| Hazardous Material Indicator Code | N | There is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials |
| Demilitarization Code: | Q | Strategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.” |
| Controlled Inventory Item Code: | U | UNCLASSIFIED |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | Y | The item does not have a nuclear hardened feature but does have other critical feature(s) such as tolerance, fit restriction or application. |
| Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
| Category | Code | Description |
|---|---|---|
| No Freight Information | ||