NSN 3040-00-896-1996 8681801, 868180-1, 8686055
Product Details | SHOULDERED SHAFT
3040-00-896-1996 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Part Alternates: 8681801, 868180-1, 8686055, 868605-5, 3040-00-896-1996, 00-896-1996, 3040008961996, 008961996
Mechanical Power Transmission Equipment | Miscellaneous Power Transmission Equipment
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | 27 JAN 1967 | 00-896-1996 | 22914 ( SHAFT, SHOULDERED ) |
Drawings & Photos | NSN 3040-00-896-1996
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 3040-00-896-1996
Technical Data | NSN 3040-00-896-1996
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL CORROSION RESISTING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS5743 CSYMJB63.0 ASSN STD SINGLE MATERIAL RESPONSE |
| FIRST END STYLE | 18 SPLINED |
| FIRST END DIAMETER | 0.7972 INCHES MINIMUM AND 0.8022 INCHES MAXIMUM |
| FIRST END SPLINE LENGTH | 0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| FIRST END SPLINE MINOR DIAMETER | 0.7318 INCHES MINIMUM AND 0.7398 INCHES MAXIMUM |
| FIRST END SPLINE MAJOR DIAMETER | 0.7972 INCHES MINIMUM AND 0.8022 INCHES MAXIMUM |
| FIRST END PITCH DIAMETER | 0.7913 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 25 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 96 TWO FLATS |
| SECOND END DIAMETER | 0.8100 INCHES NOMINAL |
| SECOND END STEP LENGTH | 0.555 INCHES MINIMUM AND 0.565 INCHES MAXIMUM |
| SECOND END ANGLE BETWEEN FLATS | 180.0 DEGREES NOMINAL |
| LARGEST STEP DIAMETER | 0.850 INCHES MINIMUM AND 0.854 INCHES MAXIMUM |
| OVERALL LENGTH | 21.800 INCHES MINIMUM AND 21.820 INCHES MAXIMUM |
| STEP QUANTITY | 11 |
| MANUFACTURERS CODE | 99193 |
| DESIGN CONTROL REFERENCE | 868605-5 |
Restrictions/Controls & Freight Information | NSN 3040-00-896-1996
| Category | Code | Description |
|---|---|---|
| Shelf-Life Code: | 0 | Nondeteriorative |
| Hazardous Material Indicator Code | N | There is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Controlled Inventory Item Code: | U | UNCLASSIFIED |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | F | The item is an Aviation Critical Safety Item/Flight Safety Critical Aircraft Part ((ACSI/FSCAP). |
| Category | Code | Description |
|---|---|---|
| NMF Description | 129920 | SHAFTS/SHAFTING,FLEX NOI STL |
| Less than car load rating | ||
| Less than truck load rating | M | 85.0 |
| Water commodity Code | 576 | unknown |
| Originating Activity Code | SE | San Antonio Air Logistics Center Kelly AFB, TX 78241-5000 |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | V | Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above. |
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | Z | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |
Management | NSN 3040-00-896-1996
Navy| Category | Code | Description |
|---|---|---|
| Cognizance Codes | 9C | Navy-owned stocks of defense construction material Naval Inventory Control Point, Mechanicsburg |
| Source of Supply | S9C | Defense Supply Center Columbus Columbus, OH 43215 |
| Agency | DN | Department of the Navy |
| Service Organization | N | U.S. Navy |
| Acquisition Advice Codes | Y | TERMINAL ITEM #(NON-STOCKED ITEMS) Future procurement is not authorized. No wholesale stock is available for issue. 1. Requisitions will not be processed to the wholesale manager. 2. Internal Service/agency requisitioning may be continued in accordance with the Service/agency requisitioning policies. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |
| Purchasing | QTY UOM |
1 EA : Each |