NSN 3040-01-020-0303 7520021, 752002-1, 01-020-0303

Product Details | SHOULDERED SHAFT

3040-01-020-0303 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Part Alternates: 7520021, 752002-1, 3040-01-020-0303, 01-020-0303, 3040010200303, 010200303

Mechanical Power Transmission Equipment | Miscellaneous Power Transmission Equipment

Supply Group (FSG)	NSN Assign.	NIIN	Item Name Code (INC)
30	25 APR 1976	01-020-0303	22914 ( SHAFT, SHOULDERED )

Drawings & Photos | NSN 3040-01-020-0303

Part Number	Request Date	QTY	Origin
3040-01-020-0303	2024-08-220	20	DIBBS
3040-01-020-0303	2024-05-123	35	DIBBS
3040-01-020-0303	2023-12-338	15	DIBBS
3040-01-020-0303	2020-10-289	29	DIBBS
3040-01-020-0303	2020-08-219	6	DIBBS
3040-01-020-0303	2020-07-211	6	DIBBS
3040-01-020-0303	2020-03-77	27	DIBBS
752002-1	2020-01-02	25	DIBBS
3040-01-020-0303	2017-04-102	12	DIBBS
3040-01-020-0303	2016-09-271	1	Spain
3040-01-020-0303	2014-02-43	7	DIBBS
3040-01-020-0303	2014-02-35	7	DIBBS
3040-01-020-0303	2013-05-150	11	DIBBS
3040-01-020-0303	2013-02-41	6	DIBBS
3040-01-020-0303	2012-06-165	12	DIBBS
3040-01-020-0303	2012-06-160	23	DIBBS
3040-01-020-0303	2012-03-73	8	DIBBS
3040-01-020-0303	2011-12-343	5	DIBBS
3040-01-020-0303	2011-06-157	10	DIBBS
3040-01-020-0303	2011-01-06	2	DIBBS
3040-01-020-0303	2010-11-312	2	DIBBS
3040-01-020-0303	2010-09-271	1	DIBBS
3040-01-020-0303	2010-08-217	1	DIBBS
3040-01-020-0303	2009-09-253	2	DIBBS
3040-01-020-0303	2009-07-187	4	DIBBS

Cross Reference | NSN 3040-01-020-0303

Part Number	Cage Code	Manufacturer
752002-1	73030	HAMILTON SUNDSTRAND CORPORATION

Request a Quote

What Our Customers Say

Thank you very much for the excellent service and professional customer care.

Ernie G. Honeywell

The service was excellent. I can think of no improvements to date that you can make regarding internet sales.

John L. Raytheon

The representative for WBParts was efficient & handled our request in a timely & professional manner.

Karen G. General Dynamics

Tried two other sources, neither of them responded, was all done online, never spoke to anyone.

Rex S. US Airforce

The response is quick and the price is often very good. We are completely satisfied.

Patricia S. NASA

Compare

NSNs for Compare ( up to 4 ): Add 3040-01-020-0303

Compare

Related Products | NSN 3040-01-020-0303

3040-01-020-0505, 3040-01-020-0506, 3040-01-020-0570, 3040-01-020-1319, 3040-01-020-1589

Technical Data | NSN 3040-01-020-0303

Characteristic	Specifications
FIRST END STYLE	30 CIRCULAR GROOVED AND EXTERNALLY THREADED
FIRST END GROOVE WIDTH	0.1000 INCHES NOMINAL
FIRST END GROOVE DIAMETER	0.3090 INCHES NOMINAL
FIRST END DISTANCE FROM END TO GROOVE	0.300 INCHES NOMINAL
FIRST END DIAMETER	0.3750 INCHES NOMINAL
FIRST END EXTERNAL THREAD LENGTH	0.300 INCHES NOMINAL
END SIMILARITY	NOT IDENTICAL
SECOND END STYLE	30 CIRCULAR GROOVED AND EXTERNALLY THREADED
SECOND END GROOVE WIDTH	0.1000 INCHES NOMINAL
SECOND END GROOVE DIAMETER	0.3090 INCHES NOMINAL
SECOND END DISTANCE FROM END TO GROOVE	0.600 INCHES NOMINAL
SECOND END DIAMETER	0.3750 INCHES NOMINAL
SECOND END EXTERNAL THREAD LENGTH	0.500 INCHES NOMINAL
LARGEST STEP DIAMETER	0.520 INCHES NOMINAL
OVERALL LENGTH	5.730 INCHES NOMINAL
STEP QUANTITY	6
III END ITEM IDENTIFICATION	TURBINE,FAN,P-N 752001-1
III FSC APPLICATION DATA	AIRCRAFT,MODEL NO. F5
MANUFACTURERS CODE	73030
DESIGN CONTROL REFERENCE	752002-1

Restrictions/Controls & Freight Information | NSN 3040-01-020-0303

Restrictions
Freight

Category	Code	Description
Shelf-Life Code:	0	Nondeteriorative
Hazardous Material Indicator Code	N	There is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:	B	Munitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.)
Controlled Inventory Item Code:	U	UNCLASSIFIED
Precious Metals Indicator Code:	A	Item does not contain precious metal
Criticality Code:	X	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:	0	Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)

Category	Code	Description
NMF Description	126900	POWER TRANS SHAFTING/SHAFTS
Less than car load rating
Less than truck load rating	W	Rating Variable
Water commodity Code	593	unknown
Originating Activity Code	SX	Oklahoma City Air Logistics Center Tinker AFB, OK 73145-3043
Air Dimension Code	A	Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity	V	Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Air Special Handling	Z	No special handling required.
Special Handling Code	9	unknonwn
HAZMAT
Type of Cargo	Z	No special type of cargo code applicable

Management | NSN 3040-01-020-0303

Air Force

Category	Code	Description
Budget Code	9	General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Price Validation	N	The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM. The price has not been analyzed or reviewed for accuracy. ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund Code	SF	Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Materiel Management Aggregation Code	TP	SX:"TEMPERATURE AND PRESSURE CONTROLS, AIRCRAFT"
Source of Supply	SMS	Defense Logistics Agency Enterprise Business Systems
Agency	DF	Department of the Air Force
Service Organization	F	U.S. Air Force
Reparability	N	Stock Fund (except Munitions)
Acquisition Advice Codes	Z	INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item Code	U	UNCLASSIFIED
Shelf Life Code	0	Nondeteriorative
Purchasing	QTY UOM	1 EA : Each