NSN 3040-01-125-6925 65125-11214-101, 01-125-6925, 6512511214101
Product Details | SHOULDERED SHAFT
3040-01-125-6925 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Part Alternates: 65125-11214-101, 3040-01-125-6925, 01-125-6925, 3040011256925, 6512511214101, 011256925
Mechanical Power Transmission Equipment | Miscellaneous Power Transmission Equipment
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | 01 FEB 1982 | 01-125-6925 | 22914 ( SHAFT, SHOULDERED ) |
Drawings & Photos | NSN 3040-01-125-6925
Demand History | NSN 3040-01-125-6925
| Part Number | Request Date | QTY | Origin |
|---|---|---|---|
| 3040-01-125-6925 | 2017-02-37 | 219 | DIBBS |
| 3040-01-125-6925 | 2016-12-341 | 222 | DIBBS |
| 3040-01-125-6925 | 2016-06-175 | 1198 | DIBBS |
| 3040-01-125-6925 | 2016-04-112 | 456 | DIBBS |
| 3040-01-125-6925 | 2016-03-63 | 742 | DIBBS |
| 3040-01-125-6925 | 2016-02-40 | 47 | DIBBS |
| 3040-01-125-6925 | 2016-01-24 | 68 | DIBBS |
| 3040-01-125-6925 | 2014-02-51 | 48 | DIBBS |
| 3040-01-125-6925 | 2013-08-240 | 80 | DIBBS |
| 3040-01-125-6925 | 2012-03-66 | 194 | DIBBS |
| 3040-01-125-6925 | 2011-10-277 | 267 | DIBBS |
| 3040-01-125-6925 | 2010-03-61 | 55 | DIBBS |
| 3040-01-125-6925 | 2007-03-87 | 44 | DIBBS |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
Ernie G.
Honeywell
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
NSNs for Compare ( up to 4 ): Add 3040-01-125-6925
Related Products | NSN 3040-01-125-6925
Technical Data | NSN 3040-01-125-6925
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL COMP 4340 |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-8844 MIL SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 32.0 MICROINCHES |
| FIRST END STYLE | 23 UNTHREADED CROSS DRILLED |
| FIRST END DIAMETER | 0.7470 INCHES MINIMUM AND 0.7479 INCHES MAXIMUM |
| FIRST END HOLE DIAMETER | 0.1400 INCHES MINIMUM AND 0.1430 INCHES MAXIMUM |
| FIRST END DISTANCE FROM HOLE CENTER TO END | 0.228 INCHES NOMINAL |
| END SIMILARITY | IDENTICAL |
| LARGEST STEP DIAMETER | 0.8720 INCHES MINIMUM AND 0.8729 INCHES MAXIMUM |
| OVERALL LENGTH | 2.644 INCHES MINIMUM AND 2.654 INCHES MAXIMUM |
| STEP QUANTITY | 3 |
| CRITICALITY CODE JUSTIFICATION | CSPY |
Restrictions/Controls & Freight Information | NSN 3040-01-125-6925
| Category | Code | Description |
|---|---|---|
| Shelf-Life Code: | 0 | Nondeteriorative |
| Hazardous Material Indicator Code | N | There is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials |
| Demilitarization Code: | B | Munitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.) |
| Controlled Inventory Item Code: | U | UNCLASSIFIED |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | Y | The item does not have a nuclear hardened feature but does have other critical feature(s) such as tolerance, fit restriction or application. |
| Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
| Category | Code | Description |
|---|---|---|
| NMF Description | 126900 | POWER TRANS SHAFTING/SHAFTS |
| Less than car load rating | ||
| Less than truck load rating | W | Rating Variable |
| Water commodity Code | 593 | unknown |
| Originating Activity Code | KE | Naval ICP Philadelphia, PA 19111 |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | V | Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above. |
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | 9 | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |
Management | NSN 3040-01-125-6925
Navy
Marines| Category | Code | Description |
|---|---|---|
| Stores Account Code | 1 | Marine Corps Stock Fund Account Item. |
| Combat Essentiality Code | 5 | Critical Repair Part to a Combat Essential End Item. Those parts or components whose failure in a combat essential end item will render the end item inoperative or reduce its effectiveness below the minimum acceptable level of efficiency. |
| Materiel Management Code | B | All CommoditiesDefense Logistics Agency, (DLA,) |
| Echelon Management Code | 2 | ICP/DSSC Marine Corps-managed Recoverability Code D items and Defense Logistics Agency (DLA)/TACOM/GSA) items which the integrated manager has not decontrolled. |
| Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
| Agency | DM | U.S. Marine Corps |
| Service Organization | M | U.S. Marine Corps |
| Reparability | Z | Nonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code. |
| Acquisition Advice Codes | D | DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |
| Purchasing | QTY UOM |
1 EA : Each |
| Category | Code | Description |
|---|---|---|
| Cognizance Codes | 9B | Navy-owned stocks of DLA material Naval Inventory Control Point, Mechanicsburg |
| Special Material ID | LU | HELICOPTERS(CH-53E) |
| Special Material Content | 9 | Non-Hazardous or Non-Sensitive Item, does not require hazardous or special handling, packaging or precautions |
| Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
| Agency | DN | Department of the Navy |
| Service Organization | N | U.S. Navy |
| Acquisition Advice Codes | D | DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |
| Purchasing | QTY UOM |
1 EA : Each |