NSN 3040-01-138-8431 162C9321 , 162C9321P02, 01-138-8431

Product Details | SHOULDERED SHAFT

3040-01-138-8431 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Part Alternates: 162C9321 , 162C9321P02, 3040-01-138-8431, 01-138-8431, 3040011388431, 011388431

Mechanical Power Transmission Equipment | Miscellaneous Power Transmission Equipment

Supply Group (FSG)	NSN Assign.	NIIN	Item Name Code (INC)
30	21 SEP 1982	01-138-8431	22914 ( SHAFT, SHOULDERED )

Drawings & Photos | NSN 3040-01-138-8431

Part Number	Request Date	QTY	Origin
162C9321P02	2020-01-12	8	DIBBS
3040-01-138-8431	2017-05-137	11	DIBBS
3040-01-138-8431	2016-09-266	9	DIBBS
3040-01-138-8431	2016-06-164	7	DIBBS
3040-01-138-8431	2016-04-96	11	DIBBS
3040-01-138-8431	2016-01-26	3	DIBBS
3040-01-138-8431	2016-01-20	1	DIBBS
3040-01-138-8431	2015-08-223	6	DIBBS
3040-01-138-8431	2015-01-05	6	DIBBS
3040-01-138-8431	2012-04-117	10	DIBBS
3040-01-138-8431	2012-04-117	2	DIBBS
3040-01-138-8431	2010-04-102	39	DIBBS
3040-01-138-8431	2009-03-86	96	DIBBS
3040-01-138-8431	2009-02-51	6	DIBBS
3040-01-138-8431	2009-01-22	17	DIBBS
3040-01-138-8431	2009-01-16	67	DIBBS
3040-01-138-8431	2009-01-16	12	DIBBS
3040-01-138-8431	2008-09-247	55	DIBBS
3040-01-138-8431	2008-06-161	12	DIBBS
3040-01-138-8431	2007-03-67	28	DIBBS

Cross Reference | NSN 3040-01-138-8431

Part Number	Cage Code	Manufacturer
162C9321	05326	GENERAL ELECTRIC CO AVIATION COMPONENT SERVICE CENTER
162C9321P02	05326	GENERAL ELECTRIC CO AVIATION COMPONENT SERVICE CENTER
162C9321P02	07482	GENERAL ELECTRIC COMPANY DBA GE
162C9321P02	99207	GENERAL ELECTRIC COMPANY DBA GE

Request a Quote

What Our Customers Say

Thank you very much for the excellent service and professional customer care.

Ernie G. Honeywell

The service was excellent. I can think of no improvements to date that you can make regarding internet sales.

John L. Raytheon

The representative for WBParts was efficient & handled our request in a timely & professional manner.

Karen G. General Dynamics

Tried two other sources, neither of them responded, was all done online, never spoke to anyone.

Rex S. US Airforce

The response is quick and the price is often very good. We are completely satisfied.

Patricia S. NASA

Compare

NSNs for Compare ( up to 4 ): Add 3040-01-138-8431

Compare

Related Products | NSN 3040-01-138-8431

3040-01-138-8432, 3040-01-138-8568, 3040-01-138-8578, 3040-01-138-8669, 3040-01-138-8758

Technical Data | NSN 3040-01-138-8431

Characteristic	Specifications
MATERIAL	STEEL
MATERIAL DOCUMENT AND CLASSIFICATION	AMS6260 ASSN STD SINGLE MATERIAL RESPONSE
SURFACE FINISH	63.0 MICROINCHES
FIRST END STYLE	18 SPLINED
FIRST END DIAMETER	0.4800 INCHES NOMINAL
FIRST END SPLINE LENGTH	0.7200 INCHES NOMINAL
FIRST END SPLINE MINOR DIAMETER	0.4800 INCHES MINIMUM AND 0.4950 INCHES MAXIMUM
FIRST END SPLINE MAJOR DIAMETER	0.6450 INCHES MINIMUM AND 0.6500 INCHES MAXIMUM
FIRST END PITCH DIAMETER	0.6000 INCHES NOMINAL
FIRST END PRESSURE ANGLE	30.0 DEGREES NOMINAL
FIRST END SPLINE QUANTITY	12
END SIMILARITY	NOT IDENTICAL
SECOND END STYLE	23 UNTHREADED CROSS DRILLED
SECOND END DIAMETER	0.4700 INCHES MINIMUM AND 0.4705 INCHES MAXIMUM
SECOND END HOLE DIAMETER	0.1255 INCHES MINIMUM AND 0.1260 INCHES MAXIMUM
SECOND END DISTANCE FROM HOLE CENTER TO END	0.2000 INCHES NOMINAL
LARGEST STEP DIAMETER	0.645 INCHES MINIMUM AND 0.650 INCHES MAXIMUM
OVERALL LENGTH	1.200 INCHES NOMINAL
STEP QUANTITY	2
SPECIAL FEATURES	FIRST END 0.109 IN. CENTER DRILL 60 DEG CSK TO 0.18 IN. DIA; HEAT TREAT RC32-40; SECOND END BORE 0.351 - 0.352 IN. DIA 0.44 IN. DP 60 DEG CSK TO 0.41 IN. DIA; CROSS DRILL 4 HOLES EQUALLY SPACED; PART OF INPUT DRIVE ASSY 162C9395
III END ITEM IDENTIFICATION	POWER UNIT 131D5023G02 FOR J85-GE-5/-13 AIRCRAFT ENGINE
MANUFACTURERS CODE	05326
DESIGN CONTROL REFERENCE	162C9321P02

Restrictions/Controls & Freight Information | NSN 3040-01-138-8431

Restrictions
Freight

Category	Code	Description
Shelf-Life Code:	0	Nondeteriorative
Hazardous Material Indicator Code	N	There is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:	B	Munitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.)
Controlled Inventory Item Code:	U	UNCLASSIFIED
Precious Metals Indicator Code:	A	Item does not contain precious metal
Criticality Code:	X	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Category	Code	Description
NMF Description	126900	POWER TRANS SHAFTING/SHAFTS
Less than car load rating
Less than truck load rating	W	Rating Variable
Water commodity Code	593	unknown
Originating Activity Code	SE	San Antonio Air Logistics Center Kelly AFB, TX 78241-5000
Air Dimension Code	A	Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity	V	Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Air Special Handling	Z	No special handling required.
Special Handling Code	9	unknonwn
HAZMAT
Type of Cargo	Z	No special type of cargo code applicable

Management | NSN 3040-01-138-8431

Air Force

Category	Code	Description
Budget Code	9	General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Price Validation	N	The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM. The price has not been analyzed or reviewed for accuracy. ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Materiel Management Aggregation Code	OK	SX:GENERAL ELECTRIC JET ENGINES & COMPONENTS, J-85
Fund Code	SF	Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of Supply	SMS	Defense Logistics Agency Enterprise Business Systems
Agency	DF	Department of the Air Force
Service Organization	F	U.S. Air Force
Reparability	N	Stock Fund (except Munitions)
Acquisition Advice Codes	J	NOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
Controlled Item Code	U	UNCLASSIFIED
Shelf Life Code	0	Nondeteriorative
Purchasing	QTY UOM	1 EA : Each