NSN 3040-01-157-6400 2498049, 01-157-6400, 011576400

Product Details | SHOULDERED SHAFT

3040-01-157-6400 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Part Alternates: 2498049, 3040-01-157-6400, 01-157-6400, 3040011576400, 011576400

Mechanical Power Transmission Equipment | Miscellaneous Power Transmission Equipment

Supply Group (FSG)	NSN Assign.	NIIN	Item Name Code (INC)
30	09 JUL 1983	01-157-6400	22914 ( SHAFT, SHOULDERED )

Drawings & Photos | NSN 3040-01-157-6400

Part Number	Request Date	QTY	Origin
2498049	2019-04-106	57	DIBBS
2498049	2019-02-45	76	DIBBS
3040-01-157-6400	2018-11-305	57	DIBBS
3040-01-157-6400	2018-08-235	42	DIBBS
3040-01-157-6400	2017-12-362	77	DIBBS
3040-01-157-6400	2016-03-67	42	DIBBS
3040-01-157-6400	2015-07-186	61	DIBBS
3040-01-157-6400	2015-04-111	41	DIBBS
3040-01-157-6400	2015-03-81	23	DIBBS
3040-01-157-6400	2013-11-317	18	DIBBS
3040-01-157-6400	2013-05-142	0	DIBBS
3040-01-157-6400	2012-05-125	27	DIBBS
3040-01-157-6400	2012-03-75	18	DIBBS
3040-01-157-6400	2012-01-03	24	DIBBS
3040-01-157-6400	2011-11-307	19	DIBBS
3040-01-157-6400	2011-06-158	12	DIBBS
3040-01-157-6400	2011-03-80	11	DIBBS
3040-01-157-6400	2010-03-64	9	DIBBS
3040-01-157-6400	2008-10-282	20	DIBBS
3040-01-157-6400	2008-08-218	19	DIBBS
3040-01-157-6400	2007-06-157	38	DIBBS

Cross Reference | NSN 3040-01-157-6400

Part Number	Cage Code	Manufacturer
2498049	3H889	PARKER-HANNIFIN CORPORATION DBA FLUID SYSTEMS DIVISION
2498049	92003	PARKER HANNIFIN CORPORATION DIV AEROSPACE GROUP HEADQUARTERS
2498049	99551	GOODRICH CORPORATION DIV POWER TRANSMISSION SYSTEMS

Request a Quote

What Our Customers Say

Thank you very much for the excellent service and professional customer care.

Ernie G. Honeywell

The service was excellent. I can think of no improvements to date that you can make regarding internet sales.

John L. Raytheon

The representative for WBParts was efficient & handled our request in a timely & professional manner.

Karen G. General Dynamics

Tried two other sources, neither of them responded, was all done online, never spoke to anyone.

Rex S. US Airforce

The response is quick and the price is often very good. We are completely satisfied.

Patricia S. NASA

Compare

NSNs for Compare ( up to 4 ): Add 3040-01-157-6400

Compare

Related Products | NSN 3040-01-157-6400

3040-01-157-6401, 3040-01-157-6933, 3040-01-157-6945, 3040-01-157-7694, 3040-01-157-7904

Technical Data | NSN 3040-01-157-6400

Characteristic	Specifications
MATERIAL	STEEL
MATERIAL DOCUMENT AND CLASSIFICATION	AMS6415 ASSN STD SINGLE MATERIAL RESPONSE
SURFACE FINISH	16.0 MICROINCHES
FIRST END STYLE	5 CIRCULAR GROOVED
FIRST END GROOVE WIDTH	0.0180 INCHES MINIMUM AND 0.0200 INCHES MAXIMUM
FIRST END GROOVE DIAMETER	0.1740 INCHES MINIMUM AND 0.1760 INCHES MAXIMUM
FIRST END DISTANCE FROM END TO GROOVE	0.0700 INCHES MINIMUM AND 0.0800 INCHES MAXIMUM
FIRST END DIAMETER	0.1850 INCHES MINIMUM AND 0.1950 INCHES MAXIMUM
END SIMILARITY	NOT IDENTICAL
SECOND END STYLE	43 EXTERNALLY THREADED AND FLAT KEYWAY
SECOND END KEYWAY WIDTH	0.1100 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM
SECOND END EXTERNAL KEYWAY LENGTH	0.060 INCHES NOMINAL
SECOND END KEYWAY DEPTH	0.080 INCHES NOMINAL
SECOND END DIAMETER	0.4340 INCHES MINIMUM AND 0.4360 INCHES MAXIMUM
SECOND END EXTERNAL THREAD LENGTH	0.3750 INCHES NOMINAL
LARGEST STEP DIAMETER	0.620 INCHES MINIMUM AND 0.640 INCHES MAXIMUM
OVERALL LENGTH	3.870 INCHES MINIMUM AND 3.890 INCHES MAXIMUM
STEP QUANTITY	5
SPECIAL FEATURES	RETURN SPRING SHAFT; SECOND END DRILLED 0.060 - 0.065 IN. DIA,1.54 - 1.57 IN. DP TO AN ADJACENT DRILL THRU 0.060 - 0.065 IN. DIA
III END ITEM IDENTIFICATION	STARTER 36E153-4A,F108 ENGINE FOR KC135R AIRCRAFT
MANUFACTURERS CODE	92003
DESIGN CONTROL REFERENCE	2498049

Restrictions/Controls & Freight Information | NSN 3040-01-157-6400

Restrictions
Freight

Category	Code	Description
Shelf-Life Code:	0	Nondeteriorative
Hazardous Material Indicator Code	N	There is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:	A	Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:	U	UNCLASSIFIED
Precious Metals Indicator Code:	A	Item does not contain precious metal
Criticality Code:	X	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

Category	Code	Description
NMF Description	126900	POWER TRANS SHAFTING/SHAFTS
Less than car load rating
Less than truck load rating	W	Rating Variable
Water commodity Code	593	unknown
Originating Activity Code	SX	Oklahoma City Air Logistics Center Tinker AFB, OK 73145-3043
Air Dimension Code	A	Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity	V	Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Air Special Handling	Z	No special handling required.
Special Handling Code	9	unknonwn
HAZMAT
Type of Cargo	Z	No special type of cargo code applicable

Management | NSN 3040-01-157-6400

Air Force
Navy

Category	Code	Description
Budget Code	9	General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Price Validation	N	The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM. The price has not been analyzed or reviewed for accuracy. ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund Code	SF	Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Materiel Management Aggregation Code	YQ	SX:"ENGINE ACCESSORIES, AIRCRAFT"
Source of Supply	SMS	Defense Logistics Agency Enterprise Business Systems
Agency	DF	Department of the Air Force
Service Organization	F	U.S. Air Force
Reparability	N	Stock Fund (except Munitions)
Acquisition Advice Codes	D	DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item Code	U	UNCLASSIFIED
Shelf Life Code	0	Nondeteriorative
Purchasing	QTY UOM	1 EA : Each

Category	Code	Description
Cognizance Codes	9B	Navy-owned stocks of DLA material Naval Inventory Control Point, Mechanicsburg
Source of Supply	SMS	Defense Logistics Agency Enterprise Business Systems
Agency	DN	Department of the Navy
Service Organization	N	U.S. Navy
Acquisition Advice Codes	D	DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item Code	U	UNCLASSIFIED
Shelf Life Code	0	Nondeteriorative
Purchasing	QTY UOM	1 EA : Each