NSN 3040-01-245-4863 5000210, 01-245-4863, 012454863
Product Details | SHOULDERED SHAFT
3040-01-245-4863 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Part Alternates: 5000210, 3040-01-245-4863, 01-245-4863, 3040012454863, 012454863
Mechanical Power Transmission Equipment | Miscellaneous Power Transmission Equipment
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | 29 NOV 1986 | 01-245-4863 | 22914 ( SHAFT, SHOULDERED ) |
Drawings & Photos | NSN 3040-01-245-4863
Cross Reference | NSN 3040-01-245-4863
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 5000210 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 3040-01-245-4863
Technical Data | NSN 3040-01-245-4863
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL COMP 17-4PH |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS-5643 ASSN STD SINGLE MATERIAL RESPONSE |
| FIRST END STYLE | 18 SPLINED |
| FIRST END DIAMETER | 0.4730 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 0.626 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 0.3330 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 0.4060 INCHES NOMINAL |
| FIRST END PITCH DIAMETER | 0.3750 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 12 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 30 CIRCULAR GROOVED AND EXTERNALLY THREADED |
| SECOND END GROOVE WIDTH | 0.0940 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 0.2500 INCHES NOMINAL |
| SECOND END DISTANCE FROM END TO GROOVE | 0.359 INCHES NOMINAL |
| SECOND END DIAMETER | 0.3750 INCHES NOMINAL |
| SECOND END EXTERNAL THREAD LENGTH | 0.359 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.562 INCHES NOMINAL |
| OVERALL LENGTH | 3.179 INCHES NOMINAL |
| STEP QUANTITY | 8 |
| SPECIAL FEATURES | ITEM HAS THRU HOLE 0.078 DIA. 0.203 IN. FROM SECOND END |
| III END ITEM IDENTIFICATION | B1B AIRCRAFT,FLIGHT CONTROL |
| MANUFACTURERS CODE | 99167 |
| DESIGN CONTROL REFERENCE | 5000210 |
Restrictions/Controls & Freight Information | NSN 3040-01-245-4863
| Category | Code | Description |
|---|---|---|
| Shelf-Life Code: | 0 | Nondeteriorative |
| Hazardous Material Indicator Code | N | There is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials |
| Demilitarization Code: | Q | Strategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.” |
| Controlled Inventory Item Code: | U | UNCLASSIFIED |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Category | Code | Description |
|---|---|---|
| NMF Description | 126900 | POWER TRANS SHAFTING/SHAFTS |
| Less than car load rating | ||
| Less than truck load rating | W | Rating Variable |
| Water commodity Code | 593 | unknown |
| Originating Activity Code | SE | San Antonio Air Logistics Center Kelly AFB, TX 78241-5000 |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | V | Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above. |
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | 9 | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |