NSN 3040-01-326-9710 754616, 01-326-9710, 013269710
Product Details | SHOULDERED SHAFT
3040-01-326-9710 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Part Alternates: 754616, 3040-01-326-9710, 01-326-9710, 3040013269710, 013269710
Mechanical Power Transmission Equipment | Miscellaneous Power Transmission Equipment
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | 04 OCT 1990 | 01-326-9710 | 22914 ( SHAFT, SHOULDERED ) |
Drawings & Photos | NSN 3040-01-326-9710
Demand History | NSN 3040-01-326-9710
| Part Number | Request Date | QTY | Origin |
|---|---|---|---|
| 3040-01-326-9710 | 2015-12-344 | 11 | DIBBS |
| 3040-01-326-9710 | 2015-10-278 | 32 | DIBBS |
| 3040-01-326-9710 | 2015-07-207 | 10 | DIBBS |
| 3040-01-326-9710 | 2015-03-78 | 15 | DIBBS |
| 3040-01-326-9710 | 2015-01-11 | 20 | DIBBS |
| 3040-01-326-9710 | 2014-10-282 | 19 | DIBBS |
| 3040-01-326-9710 | 2014-09-266 | 12 | DIBBS |
| 3040-01-326-9710 | 2014-07-190 | 10 | DIBBS |
| 3040-01-326-9710 | 2014-05-141 | 9 | DIBBS |
| 3040-01-326-9710 | 2011-05-143 | 20 | DIBBS |
| 3040-01-326-9710 | 2011-04-102 | 36 | DIBBS |
| 3040-01-326-9710 | 2011-01-14 | 33 | DIBBS |
| 3040-01-326-9710 | 2011-01-08 | 13 | DIBBS |
| 3040-01-326-9710 | 2010-09-267 | 20 | DIBBS |
| 3040-01-326-9710 | 2010-08-224 | 7 | DIBBS |
| 3040-01-326-9710 | 2010-04-102 | 7 | DIBBS |
| 3040-01-326-9710 | 2010-03-63 | 30 | DIBBS |
| 3040-01-326-9710 | 2009-02-42 | 12 | DIBBS |
| 3040-01-326-9710 | 2008-11-329 | 8 | DIBBS |
| 3040-01-326-9710 | 2008-09-269 | 4 | DIBBS |
| 3040-01-326-9710 | 2008-08-218 | 1 | DIBBS |
| 3040-01-326-9710 | 2008-05-142 | 6 | DIBBS |
| 3040-01-326-9710 | 2008-03-87 | 1 | DIBBS |
| 3040-01-326-9710 | 2008-02-51 | 14 | DIBBS |
| 3040-01-326-9710 | 2008-02-36 | 5 | DIBBS |
| 3040-01-326-9710 | 2007-12-338 | 22 | DIBBS |
| 3040-01-326-9710 | 2007-10-276 | 19 | DIBBS |
| 3040-01-326-9710 | 2007-10-276 | 9 | DIBBS |
| 3040-01-326-9710 | 2007-06-159 | 9 | DIBBS |
| 3040-01-326-9710 | 2007-04-100 | 6 | DIBBS |
| 3040-01-326-9710 | 2007-02-41 | 9 | DIBBS |
Cross Reference | NSN 3040-01-326-9710
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 754616 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
Ernie G.
Honeywell
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
NSNs for Compare ( up to 4 ): Add 3040-01-326-9710
Related Products | NSN 3040-01-326-9710
Technical Data | NSN 3040-01-326-9710
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS-625 ASSN STD SINGLE MATERIAL RESPONSE |
| FIRST END STYLE | 1 PLAIN |
| FIRST END DIAMETER | 1.4990 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 18 SPLINED |
| SECOND END DIAMETER | 1.3550 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 0.7030 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 1.0912 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 1.2500 INCHES NOMINAL |
| SECOND END PITCH DIAMETER | 1.2000 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 24 |
| LARGEST STEP DIAMETER | 1.6880 INCHES NOMINAL |
| OVERALL LENGTH | 3.2750 INCHES NOMINAL |
| STEP QUANTITY | 10 |
| SPECIAL FEATURES | FIRST END HAS 6 TEETH EQ. SP. AT 1.4990 IN. DIA. |
| III END ITEM IDENTIFICATION | F-15 ACFT |
| MANUFACTURERS CODE | 99167 |
| DESIGN CONTROL REFERENCE | 754616 |
Restrictions/Controls & Freight Information | NSN 3040-01-326-9710
| Category | Code | Description |
|---|---|---|
| Shelf-Life Code: | 0 | Nondeteriorative |
| Hazardous Material Indicator Code | N | There is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials |
| Demilitarization Code: | B | Munitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.) |
| Controlled Inventory Item Code: | U | UNCLASSIFIED |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
| Category | Code | Description |
|---|---|---|
| NMF Description | 126900 | POWER TRANS SHAFTING/SHAFTS |
| Less than car load rating | ||
| Less than truck load rating | W | Rating Variable |
| Water commodity Code | 593 | unknown |
| Originating Activity Code | TG | Warner-Robins Air Logistics Center Robins AFB, GA 31098-5609 |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | V | Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above. |
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | 9 | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |
Management | NSN 3040-01-326-9710
Air Force
Navy| Category | Code | Description |
|---|---|---|
| Budget Code | 9 | General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors. |
| Price Validation | E | The current standard price is an estimated price.
|
| Materiel Management Aggregation Code | FX | TG:F-15 EAGLE |
| Fund Code | SF | Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point. |
| Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
| Agency | DF | Department of the Air Force |
| Service Organization | F | U.S. Air Force |
| Reparability | N | Stock Fund (except Munitions) |
| Acquisition Advice Codes | D | DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |
| Purchasing | QTY UOM |
1 EA : Each |
| Category | Code | Description |
|---|---|---|
| Cognizance Codes | 9B | Navy-owned stocks of DLA material Naval Inventory Control Point, Mechanicsburg |
| Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
| Agency | DN | Department of the Navy |
| Service Organization | N | U.S. Navy |
| Acquisition Advice Codes | D | DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |
| Purchasing | QTY UOM |
1 EA : Each |