NSN 3040-01-331-1710 5819878, 01-331-1710, 013311710
Product Details | SHOULDERED SHAFT
3040-01-331-1710 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Part Alternates: 5819878, 3040-01-331-1710, 01-331-1710, 3040013311710, 013311710
Mechanical Power Transmission Equipment | Miscellaneous Power Transmission Equipment
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | 14-DEC-90 | 01-331-1710 | 22914 ( SHAFT, SHOULDERED ) |
Drawings & Photos | NSN 3040-01-331-1710
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 3040-01-331-1710
Technical Data | NSN 3040-01-331-1710
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END STYLE | 18 SPLINED |
| FIRST END DIAMETER | 0.2300 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| FIRST END SPLINE MINOR DIAMETER | 0.2580 INCHES MINIMUM AND 0.2663 INCHES MAXIMUM |
| FIRST END SPLINE MAJOR DIAMETER | 0.3238 INCHES MINIMUM AND 0.3265 INCHES MAXIMUM |
| FIRST END PITCH DIAMETER | 32.0000 INCHES MINIMUM AND 64.0000 INCHES MAXIMUM |
| FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 10 |
| END SIMILARITY | IDENTICAL |
| LARGEST STEP DIAMETER | 0.620 INCHES NOMINAL |
| OVERALL LENGTH | 3.260 INCHES NOMINAL |
| STEP QUANTITY | 6 |
| III END ITEM IDENTIFICATION | AFTERBODY SECTION,TORPEDO MK50 |
| MANUFACTURERS CODE | 53711 |
| DESIGN CONTROL REFERENCE | 5819878 |
Restrictions/Controls & Freight Information | NSN 3040-01-331-1710
| Category | Code | Description |
|---|---|---|
| Shelf-Life Code: | 0 | Nondeteriorative |
| Hazardous Material Indicator Code | N | There is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials |
| Demilitarization Code: | B | Munitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.) |
| Controlled Inventory Item Code: | U | UNCLASSIFIED |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
| Category | Code | Description |
|---|---|---|
| No Freight Information | ||