NSN 3040-01-430-4130 DAX16227, 715530, 01-430-4130
Product Details | SHOULDERED SHAFT
3040-01-430-4130 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Part Alternates: DAX16227, 715530, 3040-01-430-4130, 01-430-4130, 3040014304130, 014304130
Mechanical Power Transmission Equipment | Miscellaneous Power Transmission Equipment
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | 29 APR 1996 | 01-430-4130 | 22914 ( SHAFT, SHOULDERED ) |
Drawings & Photos | NSN 3040-01-430-4130
Demand History | NSN 3040-01-430-4130
| Part Number | Request Date | QTY | Origin |
|---|---|---|---|
| 715530 | 2025-03-72 | 3 | DIBBS |
| 715530 | 2020-05-125 | 32 | DIBBS |
| 715530 | 2020-04-112 | 32 | DIBBS |
| 715530 | 2020-04-112 | 12 | DIBBS |
| 715530 | 2020-04-110 | 23 | DIBBS |
| 715530 | 2020-03-86 | 12 | DIBBS |
| 715530 | 2019-02-42 | 7 | DIBBS |
| 715530 | 2019-01-31 | 7 | DIBBS |
| 3040-01-430-4130 | 2018-10-292 | 9 | DIBBS |
| 3040-01-430-4130 | 2018-10-277 | 9 | DIBBS |
| 3040-01-430-4130 | 2013-06-156 | 11 | DIBBS |
| 3040-01-430-4130 | 2013-06-156 | 22 | DIBBS |
| 3040-01-430-4130 | 2013-03-77 | 22 | DIBBS |
| 3040-01-430-4130 | 2013-03-74 | 11 | DIBBS |
| 3040-01-430-4130 | 2013-01-14 | 7 | DIBBS |
| 3040-01-430-4130 | 2013-01-14 | 10 | DIBBS |
| 3040-01-430-4130 | 2013-01-11 | 5 | DIBBS |
| 3040-01-430-4130 | 2012-10-295 | 3 | DIBBS |
| 3040-01-430-4130 | 2012-06-159 | 2 | DIBBS |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
Ernie G.
Honeywell
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
NSNs for Compare ( up to 4 ): Add 3040-01-430-4130
Related Products | NSN 3040-01-430-4130
Technical Data | NSN 3040-01-430-4130
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL COMP 4340 |
| SURFACE FINISH | 25.0 MICROINCHES |
| FIRST END STYLE | 74 TWO CIRCULAR GROOVES, SPLINED AND INTERNALLY THREADED |
| FIRST END GROOVE WIDTH | 0.1400 INCHES NOMINAL |
| FIRST END GROOVE DIAMETER | 2.8100 INCHES NOMINAL |
| FIRST END DISTANCE FROM END TO GROOVE | 0.134 INCHES NOMINAL |
| FIRST END DIAMETER | 3.0023 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 2.090 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 2.8350 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 3.0023 INCHES NOMINAL |
| FIRST END INTERNAL THREAD LENGTH | 1.500 INCHES NOMINAL |
| FIRST END DISTANCE BETWEEN FIRST AND SECOND GROOVE CENTERS | 1.456 INCHES NOMINAL |
| FIRST END SPLINE QUANTITY | 47 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 74 TWO CIRCULAR GROOVES, SPLINED AND INTERNALLY THREADED |
| SECOND END GROOVE WIDTH | 0.1400 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 2.8100 INCHES NOMINAL |
| SECOND END DISTANCE FROM END TO GROOVE | 0.134 INCHES NOMINAL |
| SECOND END DIAMETER | 3.0023 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 6.410 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 2.8350 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 3.0023 INCHES NOMINAL |
| SECOND END INTERNAL THREAD LENGTH | 1.500 INCHES NOMINAL |
| SECOND END DISTANCE BETWEEN FIRST AND SECOND GROOVE CENTERS | 1.456 INCHES NOMINAL |
| SECOND END SPLINE QUANTITY | 47 |
| LARGEST STEP DIAMETER | 3.149 INCHES NOMINAL |
| OVERALL LENGTH | 20.420 INCHES NOMINAL |
| STEP QUANTITY | 7 |
| III END ITEM IDENTIFICATION | 2520-01-417-4144 |
Restrictions/Controls & Freight Information | NSN 3040-01-430-4130
| Category | Code | Description |
|---|---|---|
| Shelf-Life Code: | 0 | Nondeteriorative |
| Hazardous Material Indicator Code | N | There is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Controlled Inventory Item Code: | U | UNCLASSIFIED |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Category | Code | Description |
|---|---|---|
| NMF Description | 126900 | POWER TRANS SHAFTING/SHAFTS |
| Less than car load rating | ||
| Less than truck load rating | W | Rating Variable |
| Water commodity Code | 593 | unknown |
| Originating Activity Code | AH | Defense Supply Center Columbus Columbus, OH 43215 |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | V | Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above. |
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | 9 | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |
Management | NSN 3040-01-430-4130
Army
Marines| Category | Code | Description |
|---|---|---|
| Materiel Category and Inventory Manager | J | Ground Forces Support Materiel (DLA/GSA Items) |
| Appropriation and Budget Activity | 2 | Stock Fund Secondary Items |
| Management Inventory Segment | 2 | NONREPARABLE ITEMS (Exclusive of Insurance and Provisioning Items). This code will be used to identify items which are not reparable. |
| Specific Group/Generic Code | 0 | Medical Materiel |
| Weapons Systems/End Item or Homogeneous Group | 00 | DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item |
| Accounting Requirements Code | X | Expendable item. An item of Army property coded with an ARC of ?X? in the AMDF. Expendable items require no formal accountability after issue from a stock record account. Commercial and fabricated items similar to items coded ?X? in the AMDF are considered expendable items. |
| Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
| Agency | DA | Department of the Army |
| Service Organization | A | U.S. Army |
| Reparability | Z | This is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Acquisition Advice Codes | Z | INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |
| Purchasing | QTY UOM |
1 EA : Each |
| Category | Code | Description |
|---|---|---|
| Stores Account Code | 1 | Marine Corps Stock Fund Account Item. |
| Combat Essentiality Code | 2 | Non-Critical Repair Part. Repair parts or major components whose failure in an end item will not render the end item inoperative or reduce its effectiveness below the minimum acceptable level of efficiency, and which do not fit the definition of Code 3 or 4 items. |
| Materiel Management Code | B | All CommoditiesDefense Logistics Agency, (DLA,) |
| Echelon Management Code | 2 | ICP/DSSC Marine Corps-managed Recoverability Code D items and Defense Logistics Agency (DLA)/TACOM/GSA) items which the integrated manager has not decontrolled. |
| Physical Category Code | 1 | Bin |
| Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
| Agency | DM | U.S. Marine Corps |
| Service Organization | M | U.S. Marine Corps |
| Reparability | Z | Nonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code. |
| Acquisition Advice Codes | Z | INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |
| Purchasing | QTY UOM |
1 EA : Each |