NSN 3040-01-484-9634 122-6602811 PC 1, 1226602811PC1, 6602811
Product Details | SHOULDERED SHAFT
3040-01-484-9634 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Part Alternates: 122-6602811 PC 1, 1226602811PC1, 6602811, 3040-01-484-9634, 01-484-9634, 3040014849634, 014849634
Mechanical Power Transmission Equipment | Miscellaneous Power Transmission Equipment
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | 11 MAY 2001 | 01-484-9634 | 22914 ( SHAFT, SHOULDERED ) |
Drawings & Photos | NSN 3040-01-484-9634
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 3040-01-484-9634
Technical Data | NSN 3040-01-484-9634
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-24093 CL-E TYPE I, II, OR III MIL SPEC SINGLE MATERIAL RESPONSE OR AISI 4140 OR B7 ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 63.0 MICROINCHES |
| FIRST END STYLE | 1 PLAIN |
| FIRST END DIAMETER | 8.4980 INCHES MINIMUM AND 8.5000 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 69 FLAT GROOVE AND WOODRUFF KEYWAY |
| SECOND END DISTANCE FROM END TO FLAT | 0.7500 INCHES NOMINAL |
| SECOND END KEYWAY WIDTH | 2.0000 INCHES NOMINAL |
| SECOND END EXTERNAL KEYWAY LENGTH | 7.0000 INCHES NOMINAL |
| SECOND END DISTANCE FROM KEYWAY CENTER TO END | 5.0000 INCHES NOMINAL |
| SECOND END DIAMETER | 8.2490 INCHES MINIMUM AND 8.2500 INCHES MAXIMUM |
| SECOND END GROOVED FLAT LENGTH | 0.5000 INCHES NOMINAL |
| SECOND END GROOVED FLAT DEPTH | 1.1250 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 8.9375 INCHES NOMINAL |
| OVERALL LENGTH | 89.2500 INCHES NOMINAL |
| STEP QUANTITY | 6 |
| SPECIAL FEATURES | ALL KEYWAYS TO HAVE A 0.0625 RADIUS IN BOTTOM CORNERS; FROM SECOND END, STEPS UP AT 9.2500 INCHES TO 8.5000 INCHES DIAMETER, STEPS UP AT 18.7500 INCHES TO 8.5620 INCHES DIAMETER, STEPS UP AT 28.5000 INCHES TO 8.9375 INCHES DIAMETER, STEPS DOWN AT 67.5000 INCHES TO 8.5100 INCHES DIAMETER; STEPS DOWN AT 80.1562 TO 8.5000 INCHES DIAMETER; TWO 2.0000 INCHES WIDE X 0.7500 INCHES DEEP KEYWAYS, FIRST ONE STARTS AT 9.0938 INCHES AND STOPS AT 21.0938 INCHES FROM FIRST END, SECOND ONE STARTS AT 19.1250 INCHES AND STOPS AT 28.1250 INCHES FROM SECOND END; BOTH ENDS HAVE 0.1250 INCHES X 45 DEGREE CHAMFER |
| SPECIAL TEST FEATURES | MAGNETIC PARTICLE TESTED (MT) IN ACCORDANCE WITH REFERENCE NUMBER 6, AFTER FINAL MACHINING. INDICATIONS SHALL NOT EXCEED 0.1250 INCHES IN LENGTH OR ANY 6 SQUARE INCHES AREA THAT EXHIBITS TEN OR MORE DEFECTS OF LESS THAN 0.1250 INCHES IN LENGTH. LARGE DEFECTS MAY BE REPAIRED BY WELDING |
| III END ITEM IDENTIFICATION | HANGAR DIVISION DOORS USED ON AIRCRAFT CARRIER CVN 74 |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT |
Restrictions/Controls & Freight Information | NSN 3040-01-484-9634
| Category | Code | Description |
|---|---|---|
| Shelf-Life Code: | 0 | Nondeteriorative |
| Hazardous Material Indicator Code | N | There is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Controlled Inventory Item Code: | U | UNCLASSIFIED |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
| Category | Code | Description |
|---|---|---|
| NMF Description | 126900 | POWER TRANS SHAFTING/SHAFTS |
| Less than car load rating | ||
| Less than truck load rating | W | Rating Variable |
| Water commodity Code | 593 | unknown |
| Originating Activity Code | AX | Defense Supply Center Columbus Columbus, OH 43216-5000 |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | V | Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above. |
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | 9 | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |
Management | NSN 3040-01-484-9634
Navy| Category | Code | Description |
|---|---|---|
| Cognizance Codes | 9B | Navy-owned stocks of DLA material Naval Inventory Control Point, Mechanicsburg |
| Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
| Agency | DN | Department of the Navy |
| Service Organization | N | U.S. Navy |
| Acquisition Advice Codes | J | NOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |
| Purchasing | QTY UOM |
1 EA : Each |