NSN 5310-00-196-1930 00-196-1930, 001961930
Product Details | RECESSED WASHER
5310-00-196-1930 A washer of any peripheral shape having a centrally located hole. Both bearing surfaces are parallel and flat, but one or both of the bearing surfaces must be broken by a counterbore, countersink, or similarly shaped recess. The thickness must not exceed 25 per cent of the outside diameter or the largest outside dimension. The maximum limit of the tolerance or range applied to the thickness and/or largest outside dimension must be used to determine compliance. Excludes WASHER, CONCAVE, RETAINER, PACKING, and thrust type washers. See also SPACER, SLEEVE; and SPACER, STEPPED.
Part Alternates: 5310-00-196-1930, 00-196-1930, 5310001961930, 001961930
Hardware and Abrasives | Nuts and Washers
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 00-196-1930 | 15933 ( WASHER, RECESSED ) |
Drawings & Photos | NSN 5310-00-196-1930
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 5310-00-196-1930
Technical Data | NSN 5310-00-196-1930
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL COMP 4130 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758,C4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| HARDNESS RATING | 34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM |
| STYLE DESIGNATOR | 26 RECESSED |
| HOLE DIAMETER | 0.441 INCHES MINIMUM AND 0.451 INCHES MAXIMUM |
| OUTSIDE DIAMETER | 0.771 INCHES MINIMUM AND 0.791 INCHES MAXIMUM |
| RECESS DIAMETER | 0.543 INCHES MINIMUM AND 0.557 INCHES MAXIMUM |
| MATERIAL THICKNESS | 0.068 INCHES MINIMUM AND 0.088 INCHES MAXIMUM |
| RECESS ANGLE | 45.0 DEGREES NOMINAL |
| III HEAT TREATMENT | ANNEALED |
| III MINIMUM TENSILE STRENGTH | 150000 POUNDS PER SQUARE INCH |
| MANUFACTURERS CODE | 78286 |
| DESIGN CONTROL REFERENCE | 6410-30101-102 |
Restrictions/Controls & Freight Information | NSN 5310-00-196-1930
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | N | There is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials |
| Category | Code | Description |
|---|---|---|
| No Freight Information | ||