NSN 5330-00-808-9218 314047R1, 00-808-9218, 008089218
Product Details | METAL SEAL RING
5330-00-808-9218 A circular shaped item designed to be installed in a specially prepared groove or counterbore to provide a low pressure seal. It may be supplied in various cross-sectional shapes and is cut through at one point to allow for installation and fitting. Excludes items whose primary function is to provide sealing, wiping, or wearing surface capabilities for piston configurations. See also RING, PISTON and RING, WIPER.
Part Alternates: 314047R1, 5330-00-808-9218, 00-808-9218, 5330008089218, 008089218
Hardware and Abrasives | Packing and Gasket Materials
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 01 JAN 1962 | 00-808-9218 | 21205 ( SEAL RING, METAL ) |
Drawings & Photos | NSN 5330-00-808-9218
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 5330-00-808-9218
Technical Data | NSN 5330-00-808-9218
| Characteristic | Specifications |
|---|---|
| MATERIAL | IRON OVERALL |
| METALLIC HARDNESS RATING | 97.0 MINIMUM ROCKWELL B AND 104.0 MAXIMUM ROCKWELL B |
| CROSS-SECTIONAL SHAPE STYLE | A1 PLAIN RECTANGULAR, STRAIGHT FACE |
| JOINT STYLE | 1 VERTICAL JOINT |
| RING STYLE | 5 EXPANDING CONCENTRIC |
| OUTSIDE DIAMETER | 3.221 INCHES NOMINAL |
| RADIAL WALL THICKNESS | 0.0960 INCHES MINIMUM AND 0.1060 INCHES MAXIMUM |
| OVERALL WIDTH | 0.1020 INCHES MINIMUM AND 0.1030 INCHES MAXIMUM |
| III FSC APPLICATION DATA | ENGINE,AIRCRAFT,RECIPROCATING |
| MANUFACTURERS CODE | 00198 |
| DESIGN CONTROL REFERENCE | 314047R1 |
Restrictions/Controls & Freight Information | NSN 5330-00-808-9218
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Precious Metals Indicator Code: | U | Precious metal type is unknown |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Category | Code | Description |
|---|---|---|
| NMF Description | 194120 | WASHERS/GASKETS/PCKG DVCS NOI SUB8 |
| Less than car load rating | J | 100.2 |
| Less than truck load rating | M | 85.0 |
| Water commodity Code | 596 | unknown |
| Originating Activity Code | XX | |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | ||
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | Z | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |