Product Details | WIPER RING

5330-01-481-6755 A circular, single or multipiece, rigid, metallic or nonmetallic item having a centrally located hole with a sharp edge on the inside periphery. It is supplied in various cross-sectional shapes and is designed to be installed in a cylinder, shock strut, or similar device to remove excess oil, dirt, ice, and/or foreign material from a piston, ram, or sliding rod. Excludes PACKING, PREFORMED; RING, PISTON; and SEAL RING, METAL.

Part Alternates: 4186A29H0191, 5330-01-481-6755, 01-481-6755, 5330014816755, 014816755

Hardware and Abrasives | Packing and Gasket Materials

Supply Group (FSG) NSN Assign. NIIN
53 18 JAN 2001 01-481-6755

Demand History | NSN 5330-01-481-6755

Part Number Request Date QTY Origin
4186A29H0191 2024-08-214 40 DIBBS
4186A29H0191 2024-07-194 138 DIBBS
4186A29H0191 2024-06-179 138 DIBBS
4186A29H0191 2024-03-88 30 DIBBS
4186A29H0191 2023-12-348 19 DIBBS
4186A29H0191 2023-09-271 7 DIBBS
4186A29H0191 2023-08-220 21 DIBBS
4186A29H0191 2023-07-198 18 DIBBS
4186A29H0191 2023-06-177 6 DIBBS
4186A29H0191 2023-06-166 6 DIBBS
4186A29H0191 2022-10-291 83 DIBBS
4186A29H0191 2022-10-276 83 DIBBS
5330-01-481-6755 2018-04-95 61 DIBBS
5330-01-481-6755 2018-03-87 61 DIBBS
5330-01-481-6755 2017-12-347 183 DIBBS
5330-01-481-6755 2017-10-295 183 DIBBS
5330-01-481-6755 2017-06-159 186 DIBBS
5330-01-481-6755 2017-06-157 149 DIBBS
5330-01-481-6755 2017-03-86 149 DIBBS
5330-01-481-6755 2017-03-78 149 DIBBS
5330-01-481-6755 2015-06-166 93 DIBBS
5330-01-481-6755 2015-03-89 93 DIBBS
5330-01-481-6755 2014-09-255 93 DIBBS
5330-01-481-6755 2011-03-81 243 DIBBS

Cross Reference | NSN 5330-01-481-6755

Part Number Cage Code Manufacturer
4186A29H0191 5F573 GREENE, TWEED & CO., INC.

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5330-01-481-6755

Restrictions/Controls & Freight Information | NSN 5330-01-481-6755

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 194050 GASKETS/RINGS PLUMBING FIXTURES
Less than car load rating
Less than truck load rating Q 70.0
Water commodity Code 596 unknown
Originating Activity Code TK HQ AFMC/GLSC 401 SCM/GUMB
Wright-Patterson AFB, OH 45433-5000
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity B Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5330-01-481-6755

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Materiel Management Aggregation CodeLESU:LANDING GEAR SYSTEMS AND COMPONENTS
Price ValidationP The current standard price is the initial negotiated provisioned price.
  • This is the price paid by DoD for the item as the result of price negotiation of the Provisioned Item Order (PIO) or other initial negotiated price.
  • ZOP or Standard Price challenges are permissible but should be supported with adequate justification.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each