NSN 5910-01-155-9809 01-155-9809, 011559809
Product Details | ELECTROLYTIC FIXED CAPACITOR
5910-01-155-9809 A capacitor, whose capacitance value cannot be adjusted or varied, having a chemically formed film as the dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.
Part Alternates: 5910-01-155-9809, 01-155-9809, 5910011559809, 011559809
Electrical and Electronic Equipment Components | Capacitors
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | 01-155-9809 | 00008 ( CAPACITOR, FIXED, ELECTROLYTIC ) |
Drawings & Photos | NSN 5910-01-155-9809
Cross Reference | NSN 5910-01-155-9809
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| M39018/07-0087M | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY |
| M39018/07-0287M | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY |
| MIL-C-39018/7 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY |
| MIL-PRF-39018/7 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 5910-01-155-9809
Technical Data | NSN 5910-01-155-9809
| Characteristic | Specifications |
|---|---|
| CAPACITANCE VALUE PER SECTION | 300.000 MICROFARADS SINGLE SECTION |
| TOLERANCE RANGE PER SECTION | -10.00 TO 75.00 PERCENT SINGLE SECTION |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 50.0 DC SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 105.0 DEG CELSIUS MAXIMUM |
| BODY STYLE | 26B W/O MTG FACILITIES, AXIAL TERMINALS |
| BODY DIAMETER | 0.785 INCHES MAXIMUM |
| BODY LENGTH | 1.625 INCHES MINIMUM AND 1.843 INCHES MAXIMUM |
| SCHEMATIC DIAGRAM DESIGNATOR | 5C TWO COMMON TERMINALS FOR EACH ELECTRODE |
| TERMINAL TYPE AND QUANTITY | 4 UNINSULATED WIRE LEAD |
| TERMINAL LENGTH | 0.250 INCHES NOMINAL |
| TERMINAL DIAMETER | 0.040 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER | 0.300 INCHES NOMINAL |
| CASE MATERIAL | METAL |
| CASE INSULATION MATERIAL | PLASTIC |
| CAPACITIVE ELECTRODE MATERIAL | ALUMINUM |
| EQUIVALENT SERIES RESISTANCE AT REFERENCE TEMP IN OHMS | 0.43 |
| DC LEAKAGE AT REFERENCE TEMP | 61.000 MICROAMPERES |
| ELECTRICAL POLARIZATION | POLARIZED |
| RELIABILITY INDICATOR | ESTABLISHED |
| RELIABILITY FAILURE RATE LEVEL IN PERCENT | 1.0000 |
| TEST DATA DOCUMENT | 81349-MIL-C-39018 SPECIFICATION |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-39018/7 GOVERNMENT SPECIFICATION |
| III TERMINAL SURFACE TREATMENT | SOLDER |
| III ANODE TYPE | SOLID |
| III IMPEDANCE AT MINIMUM OPERATING TEMP IN OHMS | 0.28 |
| (NON-CORE DATA) OVERALL LENGTH | 1.625 INCHES MINIMUM AND 1.843 INCHES MAXIMUM |
| III DC LEAKAGE AT MAXIMUM OPERATING TEMP | 370.0 MICROAMPERES |
| (NON-CORE DATA) OVERALL HEIGHT | 0.785 INCHES MAXIMUM |
| (NON-CORE DATA) OVERALL WIDTH | 0.785 INCHES MAXIMUM |
| MANUFACTURERS CODE | 81349 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-C-39018/7 |
| MANUFACTURERS CODE | 81349 |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | M39018/07-0087M |
Restrictions/Controls & Freight Information | NSN 5910-01-155-9809
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Category | Code | Description |
|---|---|---|
| No Freight Information | ||