Product Details | CERAMIC DIELECTRIC FIXED CAPACITOR

5910-01-214-8482 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.

Part Alternates: C312C222M1U1CA, C315C222M1U5CA, 5910-01-214-8482, 01-214-8482, 5910012148482, 012148482

Electrical and Electronic Equipment Components | Capacitors

Supply Group (FSG) NSN Assign. NIIN
59 16 AUG 1985 01-214-8482

Demand History | NSN 5910-01-214-8482

Part Number Request Date QTY Origin
5910-01-214-8482 2007-11-334 371 DIBBS

Cross Reference | NSN 5910-01-214-8482

Part Number Cage Code Manufacturer
C312C222M1U1CA 31433 KEMET ELECTRONICS CORPORATION DBA KEMET
C315C222M1U5CA 31433 KEMET ELECTRONICS CORPORATION DBA KEMET

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5910-01-214-8482

Technical Data | NSN 5910-01-214-8482

Characteristic Specifications
TERMINAL LENGTH 0.276 INCHES MINIMUM
BODY LENGTH 0.120 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH 0.100 INCHES NOMINAL
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION 100.0 DC SINGLE SECTION
OVERALL WIDTH (NON-CORE) 0.160 INCHES MAXIMUM
BODY HEIGHT 0.100 INCHES MAXIMUM
OVERALL LENGTH (NON-CORE) 0.120 INCHES MAXIMUM
INSULATION RESISTANCE AT REFERENCE TEMP 100000.0 MEGOHMS
TERMINAL SURFACE TREATMENT SOLDER
RELIABILITY INDICATOR NOT ESTABLISHED
CASE MATERIAL PLASTIC
CAPACITANCE VALUE PER SECTION 2200.000 PICOFARADS SINGLE SECTION
TOLERANCE RANGE PER SECTION -20.00 TO 20.00 PERCENT SINGLE SECTION
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT 3.0000
BODY STYLE W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
TERMINAL TYPE AND QUANTITY 2 UNINSULATED WIRE LEAD
SCHEMATIC DIAGRAM DESIGNATOR NO COMMON OR GROUNDED ELECTRODE(S)
NONDERATED OPERATING TEMP 10.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM
VOLTAGE TEMP LIMITS PER SECTION IN PERCENT CAPACITANCE CHANGE -56.0 TO 22.0 WITHOUT VOLTAGE APPLIED SINGLE SECTION
OVERALL HEIGHT (NON-CORE) 0.100 INCHES MAXIMUM
TERMINAL DIAMETER 0.016 INCHES NOMINAL
BODY WIDTH 0.160 INCHES MAXIMUM

Restrictions/Controls & Freight Information | NSN 5910-01-214-8482

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061400 CONDENSERS/PARTS NOI/CAPACITORS
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 72D unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5910-01-214-8482

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Materiel Management Aggregation CodeEHSX:ELECTRONIC COMPONENTS
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each