Product Details | LOW PASS FILTER

5915-00-005-7140 An item designed to pass all frequencies below a specified frequency. Excludes a single inductance, a single capacitance, or a single resistance. See COIL (as modified); REACTOR; CAPACITOR (as modified); and RESISTOR (as modified).

Part Alternates: 0N0573303, 0N057330-3, 5915-00-005-7140, 00-005-7140, 5915000057140, 000057140

Electrical and Electronic Equipment Components | Filters and Networks

Supply Group (FSG) NSN Assign. NIIN
59 09 JUN 1972 00-005-7140

Drawings & Photos | NSN 5915-00-005-7140


Cross Reference | NSN 5915-00-005-7140

Part Number Cage Code Manufacturer
0N057330-3 98230 NATIONAL SECURITY AGENCY

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5915-00-005-7140

Technical Data | NSN 5915-00-005-7140

Characteristic Specifications
REFERENCE FREQUENCY PER FUNCTION 1.1 MEGAHERTZ BLANK
INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS 1.0 BLANK
FREQUENCY BAND WIDTH PER FUNCTION 200.00 KILOHERTZ BLANK AND 2.00 MEGAHERTZ BLANK
SOURCE IMPEDANCE RATING PER FUNCTION 75.0 OHMS BLANK
LOAD IMPEDANCE PER FUNCTION 5.0 KILOHMS BLANK
INCLOSURE TYPE HERMETICALLY SEALED
STYLE DESIGNATOR 9 ROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES
OVERALL LENGTH 2.350 INCHES NOMINAL
BODY LENGTH 1.350 INCHES NOMINAL
BODY OUTSIDE DIAMETER 0.380 INCHES NOMINAL
MOUNTING FACILITY TYPE AND QUANTITY 1 CONNECTOR
III SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION 200.00 KILOHERTZ BLANK AND 2.00 MEGAHERTZ BLANK AND 30.00 MEGAHERTZ BLANK AND 750.00 MEGAHERTZ BLANK
III DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS 1.0 MAXIMUM BLANK AND 3.0 MINIMUM BLANK AND 40.0 MINIMUM BLANK AND 40.0 MINIMUM BLANK
III PRINCIPAL CIRCUITRY TYPE PER FUNCTION INDUCTANCE-CAPACITANCE BLANK
III AVERAGE LIFE RATING IN HOURS 10000.0
III UNPACKAGED UNIT WEIGHT 50.000 GRAMS
III OPERATING TEMP RANGE -55.0 TO 125.0 DEG CELSIUS

Restrictions/Controls & Freight Information | NSN 5915-00-005-7140

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:DMunitions List Item or Commerce Control List Item. Demilitarization required. Total destruction of the item and components so as to preclude restoration or repair to a usable condition by melting, cutting, tearing, scratching, crushing, breaking, punching, neutralizing, etc. (As an alternate, burial or deep water dumping may be used when coordinated with the DoD Demilitarization Program Office.)
Precious Metals Indicator Code:SItem contains silver
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061400 CONDENSERS/PARTS NOI/CAPACITORS
Less than car load rating P 77.5
Less than truck load rating P 77.5
Water commodity Code 72D unknown
Originating Activity Code XN National Security Agency
ATTN: L111
Fort George G. Meade, MD 20755-6000
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code Z unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable