Product Details | LOW PASS FILTER

5915-00-864-5163 An item designed to pass all frequencies below a specified frequency. Excludes a single inductance, a single capacitance, or a single resistance. See COIL (as modified); REACTOR; CAPACITOR (as modified); and RESISTOR (as modified).

Part Alternates: SMC536051, SM-C-536051, LPM500, 5915-00-864-5163, 00-864-5163, 5915008645163, 008645163

Electrical and Electronic Equipment Components | Filters and Networks

Supply Group (FSG) NSN Assign. NIIN
59 01 JAN 1962 00-864-5163

Drawings & Photos | NSN 5915-00-864-5163


Cross Reference | NSN 5915-00-864-5163

Part Number Cage Code Manufacturer
LPM500 15634 MAGNETIKA, INC
LPM500 80223 UNITED TRANSFORMER CORP SUB OF OPT INDUSTRIES INC
SM-C-536051 80063 US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5915-00-864-5163

Technical Data | NSN 5915-00-864-5163

Characteristic Specifications
REFERENCE FREQUENCY PER FUNCTION 250.0 HERTZ BLANK
INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS 0.0 BLANK
FREQUENCY BAND WIDTH PER FUNCTION 0.00 HERTZ BLANK AND 500.00 HERTZ BLANK
SOURCE IMPEDANCE RATING PER FUNCTION 10.0 KILOHMS BLANK
LOAD IMPEDANCE PER FUNCTION 10.0 KILOHMS BLANK
INPUT IMPEDANCE PER FUNCTION W/LOAD 10.0 KILOHMS BLANK
OUTPUT IMPEDANCE PER FUNCTION W/SOURCE ACROSS INPUT 10.0 KILOHMS BLANK
INCLOSURE TYPE HERMETICALLY SEALED
FUNCTIONAL TERMINAL TYPE AND QUANTITY 1 PIN INPUT 1 PIN OUTPUT 1 PIN GROUND
STYLE DESIGNATOR 2 RECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE
BODY LENGTH 1.000 INCHES NOMINAL
BODY HEIGHT 1.375 INCHES NOMINAL
BODY WIDTH 1.000 INCHES NOMINAL
MOUNTING FACILITY TYPE AND QUANTITY 4 THREADED STUD
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH 0.750 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH 0.750 INCHES NOMINAL
MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR UNC
NOMINAL THREAD SIZE 0.138 INCHES
III SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION 0.00 HERTZ BLANK AND 500.00 HERTZ BLANK AND 750.00 HERTZ BLANK AND 750.00 HERTZ BLANK
III DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS 6.0 NOMINAL BLANK AND 6.0 NOMINAL BLANK AND 35.0 NOMINAL BLANK AND 35.0 NOMINAL BLANK
MANUFACTURERS CODE 15634
DESIGN CONTROL REFERENCE LPM500

Restrictions/Controls & Freight Information | NSN 5915-00-864-5163

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061400 CONDENSERS/PARTS NOI/CAPACITORS
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 72D unknown
Originating Activity Code XX
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5915-00-864-5163

Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesVTERMINAL ITEM # Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each