NSN 5915-01-105-0339 PL110327, 11822713, 01-105-0339
Product Details | LOW PASS FILTER
5915-01-105-0339 An item designed to pass all frequencies below a specified frequency. Excludes a single inductance, a single capacitance, or a single resistance. See COIL (as modified); REACTOR; CAPACITOR (as modified); and RESISTOR (as modified).
Part Alternates: PL110327, 11822713, 5915-01-105-0339, 01-105-0339, 5915011050339, 011050339
Electrical and Electronic Equipment Components | Filters and Networks
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | 01-105-0339 | 13911 ( FILTER, LOW PASS ) |
Drawings & Photos | NSN 5915-01-105-0339
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 5915-01-105-0339
Technical Data | NSN 5915-01-105-0339
| Characteristic | Specifications |
|---|---|
| REFERENCE FREQUENCY PER FUNCTION | 43.0 KILOHERTZ BLANK |
| INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS | 8.0 BLANK |
| FREQUENCY BAND WIDTH PER FUNCTION | 1.00 KILOHERTZ BLANK AND 86.00 KILOHERTZ BLANK |
| INPUT IMPEDANCE PER FUNCTION W/LOAD | 450.0 OHMS BLANK |
| OUTPUT IMPEDANCE PER FUNCTION W/SOURCE ACROSS INPUT | 100.0 OHMS BLANK |
| INCLOSURE TYPE | ENCASED |
| FUNCTIONAL TERMINAL TYPE AND QUANTITY | 2 CONNECTOR, RECEPTACLE INPUT 1 CONNECTOR, RECEPTACLE OUTPUT 1 CONNECTOR, PLUG GROUND |
| STYLE DESIGNATOR | 36 RECTANGULAR TERMINAL/TERMINALS ON THREE SURFACES |
| OVERALL HEIGHT | 3.387 INCHES NOMINAL |
| BODY LENGTH | 2.000 INCHES NOMINAL |
| BODY HEIGHT | 2.500 INCHES NOMINAL |
| BODY WIDTH | 1.100 INCHES MAXIMUM |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 THREADED HOLE |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 2.100 INCHES NOMINAL |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| NOMINAL THREAD SIZE | 0.112 INCHES |
| III SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION | 1.00 KILOHERTZ BLANK AND 86.00 KILOHERTZ BLANK AND 172.00 KILOHERTZ BLANK AND 750.00 KILOHERTZ BLANK |
| III DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS | 6.0 MAXIMUM BLANK AND 6.0 MAXIMUM BLANK AND 12.0 MINIMUM BLANK AND 12.0 MINIMUM BLANK |
| III INPUT TERMINAL MANUFACTURER CODE | 19200 |
| III INPUT TERMINAL IDENTIFICATION | FEMALE JACKS |
| III OUTPUT TERMINAL MANUFACTURER CODE | 19200 |
| III OUTPUT TERMINAL IDENTIFICATION | FEMALE JACK |
| III BODY MATERIAL | METAL |
Restrictions/Controls & Freight Information | NSN 5915-01-105-0339
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Category | Code | Description |
|---|---|---|
| No Freight Information | ||