Product Details | LOW PASS FILTER

5915-01-283-5923 An item designed to pass all frequencies below a specified frequency. Excludes a single inductance, a single capacitance, or a single resistance. See COIL (as modified); REACTOR; CAPACITOR (as modified); and RESISTOR (as modified).

Part Alternates: TLP2252XC1, TLP225-2XC1, TLP2502XC1, TLP250-2XC1, 5915-01-283-5923, 01-283-5923, 5915012835923, 012835923

Electrical and Electronic Equipment Components | Filters and Networks

Supply Group (FSG) NSN Assign. NIIN
59 09 AUG 1988 01-283-5923

Drawings & Photos | NSN 5915-01-283-5923


Cross Reference | NSN 5915-01-283-5923

Part Number Cage Code Manufacturer
TLP225-2XC1 04423 TELONIC BERKELEY, INC.
TLP250-2XC1 04423 TELONIC BERKELEY, INC.

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5915-01-283-5923

Technical Data | NSN 5915-01-283-5923

Characteristic Specifications
REFERENCE FREQUENCY PER FUNCTION 125.0 MEGAHERTZ BLANK
INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS 1.0 BLANK
FREQUENCY BAND WIDTH PER FUNCTION 1.00 HERTZ BLANK AND 250.00 MEGAHERTZ BLANK
SOURCE IMPEDANCE RATING PER FUNCTION 50.0 OHMS BLANK
LOAD IMPEDANCE PER FUNCTION 50.0 OHMS BLANK
VOLTAGE STANDING WAVE RATIO PER FUNCTION 1.5 BLANK
VOLTAGE STANDING WAVE RATIO FREQUENCY LIMITS PER FUNCTION 1.0 HERTZ BLANK AND 250.0 MEGAHERTZ BLANK
INCLOSURE TYPE ENCASED
FUNCTIONAL TERMINAL TYPE AND QUANTITY 1 CONNECTOR, RECEPTACLE INPUT 1 CONNECTOR, RECEPTACLE OUTPUT
STYLE DESIGNATOR 26 ROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES
OVERALL LENGTH 2.950 INCHES NOMINAL
BODY OUTSIDE DIAMETER 0.500 INCHES NOMINAL
MOUNTING FACILITY TYPE AND QUANTITY 2 TERMINAL
III SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION 1.00 HERTZ BLANK AND 250.00 MEGAHERTZ BLANK AND 425.00 MEGAHERTZ BLANK AND 500.00 MEGAHERTZ BLANK
III DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS 3.0 MAXIMUM BLANK AND 3.0 MAXIMUM BLANK AND 20.0 MINIMUM BLANK AND 29.0 MINIMUM BLANK
III AVERAGE POWER RATING PER FUNCTION 5.0 WATTS BLANK
III PRINCIPAL CIRCUITRY TYPE PER FUNCTION INDUCTANCE-CAPACITANCE BLANK
III INPUT TERMINAL MANUFACTURER CODE 04423
III INPUT TERMINAL IDENTIFICATION SMA-RECEPTACLE
III OUTPUT TERMINAL MANUFACTURER CODE 04423

Restrictions/Controls & Freight Information | NSN 5915-01-283-5923

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061400 CONDENSERS/PARTS NOI/CAPACITORS
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 72D unknown
Originating Activity Code TH Defense Supply Center Columbus
Columbus, OH 43215
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable