Product Details | CONNECTOR ADAPTER

5935-01-102-0352 An adapter with electrical contacts which provides facilities for joining two or more electrical connectors, whose design or function will not normally warrant their junction. It is not designed for permanent attachment to a cable, cord, coaxial line, or wire. The physical shape of an electrical connector should not be the determining factor of its name. Tee, angle, straight, and Y-shaped adapters are all ADAPTER, CONNECTOR. Excludes ADAPTER, CONNECTOR TO LAMPBASE; ADAPTER, LAMPHOLDER TO CONNECTOR; ADAPTER (1), CABLE CLAMP TO CONNECTOR; and ADAPTER, LAMPHOLDER. For items designed as a mechanical connection between an electrical conduit and an electrical connector, see ADAPTER (1), ELECTRICAL CONDUIT.

Part Alternates: M55339/37-00001, M553393700001, MIL-A-55339/37, MILA5533937, 3180232000, 3180-2320-00, 5935-01-102-0352, 01-102-0352, 5935011020352, 011020352

Electrical and Electronic Equipment Components | Connectors, Electrical

Supply Group (FSG) NSN Assign. NIIN
59 11 OCT 1980 01-102-0352

Drawings & Photos | NSN 5935-01-102-0352


Demand History | NSN 5935-01-102-0352

Part Number Request Date QTY Origin
1057845-1 2025-02-49 55 DIBBS
1057845-1 2024-06-166 77 DIBBS
1057845-1 2024-06-165 77 DIBBS
1057845-1 2024-06-159 77 DIBBS
1057845-1 2024-06-156 77 DIBBS
1057845-1 2024-06-156 23 DIBBS
1057845-1 2024-05-142 77 DIBBS
1057845-1 2024-05-142 23 DIBBS
M553393700001 2021-05-145 54 United States
1057845-1 2021-04-95 143 DIBBS
1057845-1 2021-03-88 51 DIBBS
1057845-1 2021-03-80 143 DIBBS
1057845-1 2021-03-77 51 DIBBS
1057845-1 2021-01-28 64 DIBBS
1057845-1 2020-12-349 68 DIBBS
1057845-1 2020-12-338 68 DIBBS
1057845-1 2019-09-255 500 DIBBS
1057845-1 2019-07-190 422 DIBBS
1057845-1 2019-06-169 66 DIBBS
5935-01-102-0352 2019-06-161 1 DIBBS-RFPs
1057845-1 2019-05-122 411 DIBBS
5935-01-102-0352 2019-04-97 66 DIBBS
5935-01-102-0352 2019-03-66 358 DIBBS
5935-01-102-0352 2019-02-45 288 DIBBS
5935-01-102-0352 2019-01-31 369 DIBBS
5935-01-102-0352 2018-11-317 150 DIBBS
5935-01-102-0352 2018-11-305 150 DIBBS
5935-01-102-0352 2018-09-253 186 DIBBS
5935-01-102-0352 2018-08-238 186 DIBBS
5935-01-102-0352 2018-08-227 119 DIBBS
5935-01-102-0352 2018-08-214 119 DIBBS
5935-01-102-0352 2011-10-300 10 United States
5935-01-102-0352 2011-08-213 655 DIBBS
5935-01-102-0352 2010-10-299 819 DIBBS
5935-01-102-0352 2010-09-266 600 DIBBS
5935-01-102-0352 2010-08-228 280 DIBBS
5935-01-102-0352 2010-07-188 463 DIBBS
5935-01-102-0352 2010-05-134 475 DIBBS
5935-01-102-0352 2010-05-123 486 DIBBS
5935-01-102-0352 2010-04-103 55 DIBBS
5935-01-102-0352 2010-04-100 38 DIBBS
5935-01-102-0352 2010-04-95 332 DIBBS
5935-01-102-0352 2010-03-67 476 DIBBS
5935-01-102-0352 2010-02-49 351 DIBBS
5935-01-102-0352 2010-02-36 239 DIBBS
5935-01-102-0352 2009-09-244 355 DIBBS
5935-01-102-0352 2009-08-222 188 DIBBS
5935-01-102-0352 2009-07-203 184 DIBBS
5935-01-102-0352 2009-07-183 455 DIBBS
5935-01-102-0352 2009-06-155 267 DIBBS
5935-01-102-0352 2009-05-125 50 DIBBS
5935-01-102-0352 2009-01-21 54 DIBBS
5935-01-102-0352 2009-01-07 241 DIBBS
5935-01-102-0352 2008-12-353 52 DIBBS
5935-01-102-0352 2008-12-343 203 DIBBS
5935-01-102-0352 2008-11-324 130 DIBBS
5935-01-102-0352 2008-11-322 207 DIBBS
5935-01-102-0352 2008-09-266 186 DIBBS
5935-01-102-0352 2007-11-334 42 DIBBS

Cross Reference | NSN 5935-01-102-0352

Part Number Cage Code Manufacturer
3180-2320-00 26805 TYCO ELECTRONICS CORP
M55339/37-00001 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
MIL-A-55339/37 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5935-01-102-0352

Technical Data | NSN 5935-01-102-0352

Characteristic Specifications
BODY STYLE 1N STRAIGHT SHAPE, EXTERNAL/INTERNAL COUPLING
OVERALL LENGTH 1.291 INCHES MAXIMUM
OVERALL DIAMETER 0.438 INCHES NOMINAL
CONNECTOR LOCKING METHOD BAYONET PIN AND EXTERNALLY THREADED SHELL
THREADED DEVICE TYPE COUPLING FACILITY
THREAD SERIES DESIGNATOR UNEF
NOMINAL THREAD SIZE 0.438 INCHES
THREAD CLASS 2A
THREAD QUANTITY PER INCH 28
THREAD DIRECTION RIGHT-HAND
NOMINAL THREAD LENGTH 0.187 INCHES
SHELL TYPE SOLID
SHELL MATERIAL COPPER ALLOY
MATING END QUANTITY 2
CONTACT POSITION ARRANGEMENT STYLE ABBJ BNC 1ST MATING END ABCZ TNC 2ND MATING END
INCLUDED CONTACT QUANTITY 1 ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT REMOVABILITY REMOVABLE ALL MATING ENDS SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE COAXIAL SOCKET ALL MATING ENDS SINGLE CONTACT GROUPING
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS 50.0 ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT MATERIAL COPPER ALLOY ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT GOLD ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION MIL-G-45204,TYPE 1,CL 2,GRADE C MIL SPEC SINGLE TREATMENT RESPONSE ALL MATING ENDS SINGLE CONTACT GROUPING
ENVIRONMENTAL PROTECTION MOISTURE RESISTANT AND SALT WATER RESISTANT AND SHOCK RESISTANT AND THERMAL SHOCK RESISTANT AND VIBRATION RESISTANT
TEST DATA DOCUMENT 81349-MIL-A-55339 SPECIFICATION
SPECIFICATION/STANDARD DATA 81349-MIL-A-55339/37 GOVERNMENT SPECIFICATION
III PRECIOUS MATERIAL GOLD
III PRECIOUS MATERIAL AND WEIGHT 0.010 GOLD GRAINS, TROY
III PRECIOUS MATERIAL AND LOCATION CONTACT SURFACES GOLD
MANUFACTURERS CODE 81349
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE MIL-A-55339/37
MANUFACTURERS CODE 81349
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE M55339/37-00001

Restrictions/Controls & Freight Information | NSN 5935-01-102-0352

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Electro-static Discharge Susceptible:ANo known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity
Precious Metals Indicator Code:GItem contains gold
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061680 ELEC WIRING PLUGS ETC
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 658 unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5935-01-102-0352

Category Code Description
Materiel Category and Inventory ManagerQ Electronics Materiel (DLA/GSA Items)
Appropriation and Budget Activity2 Stock Fund Secondary Items
Management Inventory Segment2 NONREPARABLE ITEMS (Exclusive of Insurance and Provisioning Items). This code will be used to identify items which are not reparable.
Specific Group/Generic Code0 Medical Materiel
Weapons Systems/End Item or Homogeneous Group00DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
Accounting Requirements CodeX Expendable item. An item of Army property coded with an ARC of ?X? in the AMDF. Expendable items require no formal accountability after issue from a stock record account. Commercial and fabricated items similar to items coded ?X? in the AMDF are considered expendable items.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDADepartment of the Army
Service OrganizationAU.S. Army
ReparabilityZThis is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item.
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Materiel Management Aggregation CodeEHSX:ELECTRONIC COMPONENTS
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Price ValidationV The current standard price has been validated.
  • The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
  • The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
  • ZOP or Standard price challenges are permissible but must be supported by adequate justification.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Stores Account Code1Marine Corps Stock Fund Account Item.
Combat Essentiality Code5Critical Repair Part to a Combat Essential End Item. Those parts or components whose failure in a combat essential end item will render the end item inoperative or reduce its effectiveness below the minimum acceptable level of efficiency.
Materiel Management CodeBAll CommoditiesDefense Logistics Agency, (DLA,)
Echelon Management Code2ICP/DSSC Marine Corps-managed Recoverability Code D items and Defense Logistics Agency (DLA)/TACOM/GSA) items which the integrated manager has not decontrolled.
Physical Category Code1Bin
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDMU.S. Marine Corps
Service OrganizationMU.S. Marine Corps
ReparabilityZNonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code.
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each