NSN 5950-00-080-0443 283A418P1, 00-080-0443, 000800443
Product Details | CURRENT TRANSFORMER
5950-00-080-0443 An item consisting of one or more windings, designed to be placed near or connected in series with an alternating current power line to measure the current passing through the line by means of a meter; or to control the current passing through the line by means of a control device. Excludes TRANSFORMER, POWER, CURRENT REGULATING.
Part Alternates: 283A418P1, 5950-00-080-0443, 00-080-0443, 5950000800443, 000800443
Electrical and Electronic Equipment Components | Coils and Transformers
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | 01 JAN 1963 | 00-080-0443 | 00738 ( TRANSFORMER, CURRENT ) |
Request a Quote
What Our Customers Say
Compare
NSNs for Compare ( up to 4 ): Add 5950-00-080-0443
Related Products | NSN 5950-00-080-0443
Technical Data | NSN 5950-00-080-0443
| Characteristic | Specifications |
|---|---|
| TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD |
| WINDING OPERATING VOLTAGE | 115.00 AC VOLTS MINIMUM AND 200.00 AC VOLTS MAXIMUM SINGLE COMPONENT SINGLE PRIMARY |
| WINDING OPERATING CURRENT | 250.0 AMPERES DC MAXIMUM SINGLE COMPONENT SINGLE PRIMARY 2.0 AMPERES DC MAXIMUM SINGLE COMPONENT SINGLE SECONDARY |
| FREQUENCY RATING | 400.0 HERTZ NOMINAL SINGLE COMPONENT |
| (NON-CORE DATA) VOLT-AMPERE LOAD ACCURACY IN PERCENT | 1.0 SINGLE COMPONENT |
| WINDING FUNCTION AND QUANTITY | 1 PRIMARY AND 1 SECONDARY SINGLE COMPONENT |
| INPUT-OUTPUT PHASE RELATIONSHIP | SINGLE PHASE TO SINGLE PHASE SINGLE COMPONENT |
| MOUNTING METHOD | FLANGE AND UNTHREADED HOLE SINGLE GROUP |
| MOUNTING FACILITY QUANTITY | 4 1ST GROUP |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.500 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.375 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| INCLOSURE TYPE | OPEN |
| BODY LENGTH | 2.500 INCHES NOMINAL |
| BODY HEIGHT | 2.500 INCHES NOMINAL |
| BODY WIDTH | 2.250 INCHES NOMINAL |
| SPECIAL FEATURES | 125 TO 1 CURRENT RATIO RATING |
| III INSTALLATION FOR WHICH DESIGNED | INDOOR NONPORTABLE |
| MANUFACTURERS CODE | 24446 |
| DESIGN CONTROL REFERENCE | 283A418P1 |
Restrictions/Controls & Freight Information | NSN 5950-00-080-0443
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Precious Metals Indicator Code: | U | Precious metal type is unknown |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Category | Code | Description |
|---|---|---|
| NMF Description | 063420 | TRANSFORMERS,NOI,OR TRANSFORMER PAR |
| Less than car load rating | P | 77.5 |
| Less than truck load rating | W | Rating Variable |
| Water commodity Code | 595 | unknown |
| Originating Activity Code | XX | |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | H | Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc. |
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | 9 | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |



