NSN 5950-01-254-5155 TS185, TS185A, 01-254-5155
Product Details | CURRENT TRANSFORMER
5950-01-254-5155 An item consisting of one or more windings, designed to be placed near or connected in series with an alternating current power line to measure the current passing through the line by means of a meter; or to control the current passing through the line by means of a control device. Excludes TRANSFORMER, POWER, CURRENT REGULATING.
Part Alternates: TS185, TS185A, 5950-01-254-5155, 01-254-5155, 5950012545155, 012545155
Electrical and Electronic Equipment Components | Coils and Transformers
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | 06 MAY 1987 | 01-254-5155 | 00738 ( TRANSFORMER, CURRENT ) |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 5950-01-254-5155
Technical Data | NSN 5950-01-254-5155
| Characteristic | Specifications |
|---|---|
| TERMINAL TYPE AND QUANTITY | 4 WIRE LEAD |
| WINDING OPERATING VOLTAGE | 0.06 AC KILOVOLTS MINIMUM SINGLE COMPONENT SINGLE PRIMARY INPUT 30.00 AC KILOVOLTS MAXIMUM SINGLE COMPONENT SINGLE PRIMARY OUTPUT |
| WINDING OPERATING CURRENT | 60.0 AMPERES AC NOMINAL SINGLE COMPONENT SINGLE PRIMARY |
| FREQUENCY RATING | 60.0 HERTZ NOMINAL SINGLE COMPONENT |
| INPUT-OUTPUT PHASE RELATIONSHIP | SINGLE PHASE TO SINGLE PHASE SINGLE COMPONENT |
| MOUNTING METHOD | UNTHREADED HOLE SINGLE GROUP |
| MOUNTING FACILITY QUANTITY | 4 SINGLE GROUP |
| MOUNTING HOLE DIAMETER | 0.188 INCHES NOMINAL SINGLE GROUP |
| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 1.125 INCHES MINIMUM AND 1.438 INCHES MAXIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| INCLOSURE TYPE | PARTIALLY INCLOSED |
| BODY LENGTH | 2.969 INCHES NOMINAL |
| BODY HEIGHT | 3.531 INCHES NOMINAL |
| BODY WIDTH | 2.719 INCHES NOMINAL |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| III END ITEM IDENTIFICATION | OMNI-DIRECTIONAL ALS (ODALS) |
| MANUFACTURERS CODE | 25506 |
| DESIGN CONTROL REFERENCE | TS185A |
Restrictions/Controls & Freight Information | NSN 5950-01-254-5155
| Category | Code | Description |
|---|---|---|
| Shelf-Life Code: | 0 | Nondeteriorative |
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | B | Munitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.) |
| Controlled Inventory Item Code: | U | UNCLASSIFIED |
| Precious Metals Indicator Code: | U | Precious metal type is unknown |
| Criticality Code: | N | The item does not have a critical feature such as tolerance, fit restrictions or application. Nuclear hardness properties have not been determined (not valid for input). |
| Category | Code | Description |
|---|---|---|
| No Freight Information | ||