Product Details | PLATE INSULATOR

5970-00-760-0179 An insulator having flat surfaces, with or without holes, whose thickness does not exceed 25 percent of its length or width, whichever is smaller, and whose shape is other than round. Excludes INSULATOR (1), SPACER; INSULATOR (1), WASHER; MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT; PLATE, ELECTRICAL SHIELD; and TERMINAL BOARD.

Part Alternates: 7600179, 5970-00-760-0179, 00-760-0179, 5970007600179, 007600179

Electrical and Electronic Equipment Components | Electrical Insulators and Insulating Materials

Supply Group (FSG) NSN Assign. NIIN
59 01 JAN 1962 00-760-0179

Drawings & Photos | NSN 5970-00-760-0179


Cross Reference | NSN 5970-00-760-0179

Part Number Cage Code Manufacturer
7600179 19200 US ARMY ARDEC RDECOM

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5970-00-760-0179

Technical Data | NSN 5970-00-760-0179

Characteristic Specifications
STYLE DESIGNATOR K90 RECTANGULAR, STEPPED
OVERALL LENGTH 0.875 INCHES NOMINAL
OVERALL WIDTH 0.812 INCHES NOMINAL
FIRST HOLE DIAMETER 0.1094 INCHES NOMINAL
SECOND LEG WIDTH 0.340 INCHES NOMINAL
FIRST LEG WIDTH 0.048 INCHES NOMINAL
FIRST STEP HEIGHT 0.062 INCHES NOMINAL
SECOND SLOT DEPTH 0.031 INCHES NOMINAL
FIRST SLOT WIDTH 0.188 INCHES MINIMUM AND 0.193 INCHES MAXIMUM
FIRST HOLE SPACING 0.250 INCHES NOMINAL
SECOND STEP HEIGHT 0.062 INCHES NOMINAL
THIRD STEP HEIGHT 0.062 INCHES NOMINAL
SECOND HOLE SPACING 0.406 INCHES NOMINAL
THIRD HOLE SPACING 0.375 INCHES NOMINAL
FIRST SLOT DEPTH 0.031 INCHES NOMINAL
SECOND SLOT WIDTH 0.188 INCHES MINIMUM AND 0.193 INCHES MAXIMUM
MATERIAL AND LOCATION OVERALL RUBBER,HARD,SHEET,GRADE 1,FCS-136
SPECIAL FEATURES CUTOUT ON EACH SIDE 0.125 IN. WIDE 0.062 IN. FROM END
MANUFACTURERS CODE 19200
DESIGN CONTROL REFERENCE 7600179

Restrictions/Controls & Freight Information | NSN 5970-00-760-0179

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 103300 INSULATING MATERIAL NOI
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 72D unknown
Originating Activity Code XX
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5970-00-760-0179

Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesJNOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative