NSN 5970-00-838-1947 618419, 6184191, 618419-1
Product Details | PLATE INSULATOR
5970-00-838-1947 An insulator having flat surfaces, with or without holes, whose thickness does not exceed 25 percent of its length or width, whichever is smaller, and whose shape is other than round. Excludes INSULATOR (1), SPACER; INSULATOR (1), WASHER; MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT; PLATE, ELECTRICAL SHIELD; and TERMINAL BOARD.
Part Alternates: 618419, 6184191, 618419-1, 5970-00-838-1947, 00-838-1947, 5970008381947, 008381947
Electrical and Electronic Equipment Components | Electrical Insulators and Insulating Materials
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | 09 DEC 1966 | 00-838-1947 | 18296 ( INSULATOR, PLATE ) |
Request a Quote
What Our Customers Say
Compare
NSNs for Compare ( up to 4 ): Add 5970-00-838-1947
Related Products | NSN 5970-00-838-1947
Technical Data | NSN 5970-00-838-1947
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | K42 FLAT, DIAMOND |
| OVERALL LENGTH | 1.248 INCHES MINIMUM AND 1.252 INCHES MAXIMUM |
| OVERALL HEIGHT | 0.001 INCHES MINIMUM AND 0.002 INCHES MAXIMUM |
| OVERALL WIDTH | 0.700 INCHES NOMINAL |
| FIRST HOLE DIAMETER | 0.156 INCHES NOMINAL |
| SECOND HOLE DIAMETER | 0.156 INCHES NOMINAL |
| FIRST END RADIUS | 0.145 INCHES NOMINAL |
| FOURTH HOLE SPACING | 0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| FIRST HOLE SPACING | 0.145 INCHES NOMINAL |
| SECOND HOLE SPACING | 0.570 INCHES MINIMUM AND 0.590 INCHES MAXIMUM |
| THIRD HOLE SPACING | 0.958 INCHES MINIMUM AND 0.962 INCHES MAXIMUM |
| FIRST SIDE RADIUS | 0.350 INCHES NOMINAL |
| FIFTH HOLE SPACING | 0.093 INCHES MINIMUM AND 0.107 INCHES MAXIMUM |
| MATERIAL AND LOCATION | OVERALL ALUMINUM ALLOY, QQ-A-250/11, ALLOY 6061, T4 |
| SURFACE TREATMENT AND LOCATION | OVERALL ANODIZED |
Restrictions/Controls & Freight Information | NSN 5970-00-838-1947
| Category | Code | Description |
|---|---|---|
| Shelf-Life Code: | 0 | Nondeteriorative |
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Controlled Inventory Item Code: | U | UNCLASSIFIED |
| Precious Metals Indicator Code: | U | Precious metal type is unknown |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Category | Code | Description |
|---|---|---|
| No Freight Information | ||
Management | NSN 5970-00-838-1947
| Category | Code | Description |
|---|---|---|
| Cognizance Codes | 9G | Navy-owned stocks of defense general material Naval Inventory Control Point, Mechanicsburg |
| Source of Supply | S9G | Defense Supply Center Richmond Richmond, VA 23297 |
| Agency | DN | Department of the Navy |
| Service Organization | N | U.S. Navy |
| Acquisition Advice Codes | V | TERMINAL ITEM # Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |



