Product Details | VARIABLE ATTENUATOR

5985-00-044-6048 A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).

Part Alternates: 2207178G1, 5985-00-044-6048, 00-044-6048, 5985000446048, 000446048

Electrical and Electronic Equipment Components | Antennas, Waveguides, and Related Equipment

Supply Group (FSG) NSN Assign. NIIN
59 01 JAN 1961 00-044-6048

Drawings & Photos | NSN 5985-00-044-6048


Cross Reference | NSN 5985-00-044-6048

Part Number Cage Code Manufacturer
2207178G1 28527 EXELIS INC. DBA ELECTRONIC SYSTEMS, INTEGRATED

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5985-00-044-6048

Technical Data | NSN 5985-00-044-6048

Characteristic Specifications
APPLICATION DESIGN TRANSMISSION LINE
FREQUENCY RANGE 962.000 MEGAHERTZ MINIMUM AND 121.500 GIGAHERTZ MAXIMUM
IMPEDANCE RATING IN OHMS 50.0 INPUT-OUTPUT
OVERALL ATTENUATION RANGE IN DECIBELS 7.0 TO 100.0
ATTENUATION VARIATION METHOD CONTINUOUS
BODY STYLE 9A COAXIAL TYPE
OVERALL LENGTH 6.750 INCHES NOMINAL
OVERALL HEIGHT 1.850 INCHES NOMINAL
OVERALL WIDTH 2.200 INCHES NOMINAL
ADJUSTMENT DEVICE TYPE AND QUANTITY 1 KNOB
TERMINAL TYPE AND QUANTITY 2 CONNECTOR, COAXIAL, MALE
COAXIAL CONNECTOR SERIES DESIGNATION BNC
MOUNTING FACILITY TYPE AND QUANTITY 4 UNTHREADED HOLE
MOUNTING FACILITY PATTERN FOUR POSITION RECTANGULAR
UNTHREADED MOUNTING HOLE DIAMETER 0.186 INCHES MINIMUM AND 0.196 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH 2.000 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH 1.680 INCHES NOMINAL
MANUFACTURERS CODE 28527
DESIGN CONTROL REFERENCE 2207178G1

Restrictions/Controls & Freight Information | NSN 5985-00-044-6048

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:BMunitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.)
Precious Metals Indicator Code:PItem contains platinum family metals
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 062960 REOSTATS/PARTS NOI
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 72D unknown
Originating Activity Code XX
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable