Product Details | VARIABLE ATTENUATOR

5985-00-079-6886 A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).

Part Alternates: 378-0560-00, 5985-00-079-6886, 00-079-6886, 5985000796886, 378056000, 000796886

Electrical and Electronic Equipment Components | Antennas, Waveguides, and Related Equipment

Supply Group (FSG) NSN Assign. NIIN
59 01 JAN 1963 00-079-6886

Cross Reference | NSN 5985-00-079-6886

Part Number Cage Code Manufacturer
378-0560-00 13499 ROCKWELL COLLINS, INC. DBA GOVERNMENT SYSTEMS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5985-00-079-6886

Technical Data | NSN 5985-00-079-6886

Characteristic Specifications
APPLICATION DESIGN TRANSMISSION LINE
FREQUENCY RANGE 0.000 HERTZ MINIMUM AND 450.000 MEGAHERTZ MAXIMUM
IMPEDANCE RATING IN OHMS 50.0 INPUT-OUTPUT
POWER RATING 500.0 MILLIWATTS AVERAGE
OVERALL ATTENUATION RANGE IN DECIBELS 0.0 TO 90.0
OVERALL ATTENUATION ACCURACY IN DECIBELS -0.50 TO 0.50
ATTENUATION VARIATION METHOD STEPPED
OVERALL LENGTH 2.875 INCHES NOMINAL
OVERALL HEIGHT 2.245 INCHES NOMINAL
OVERALL WIDTH 2.875 INCHES NOMINAL
MOUNTING FACILITY TYPE AND QUANTITY 3 THREADED HOLE
MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR UNC
MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER 0.138 INCHES
MOUNTING THREAD QUANTITY 32 PER INCH

Restrictions/Controls & Freight Information | NSN 5985-00-079-6886

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:DMunitions List Item or Commerce Control List Item. Demilitarization required. Total destruction of the item and components so as to preclude restoration or repair to a usable condition by melting, cutting, tearing, scratching, crushing, breaking, punching, neutralizing, etc. (As an alternate, burial or deep water dumping may be used when coordinated with the DoD Demilitarization Program Office.)
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061700 ELEC APPLIANCES/INSTRUMENTS NOI
Less than car load rating W Rating Variable
Less than truck load rating W Rating Variable
Water commodity Code 658 unknown
Originating Activity Code XX
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable